Samsung XUQ09A2MD2/XSV manual Selecting the Automatic Operating Mode, SET Temp

Page 10

Selecting the Automatic Operating Mode

You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed.

1If necessary, press the (On/Off) button.

Result: The 5 Way indicator on the indoor unit lights up.

The air conditioner starts up in the mode selected when the unit was last used.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

lt will start up normally after three minutes.

2If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it

appears.

Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in AUTO mode.

Note You can change modes at any time.

3To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.), press the TEMPERATURE buttons one or more times.

SET TEMP.

SET TEMP.

-

SET TEMP.

SET TEMP.

-2°C

-1°C

Standard temperature

+1°C

+2°C

< When you feel hot >

 

< When you feel chilly >

Note Auto Change Over Function (Only the Inverter Models)

In the Automatic mode, the air conditioner selects one of COOL, HEAT, DRY depending on the indoor and outdoor temperatures. If the air conditioner has not been operated for an hour, the air conditioner will take the current temperatures again and it will restart operating in

the optimum mode.

E-10

Image 10
Contents OWNER’S Safety Precautions Contents View of the Unit Indoor UnitSH07ZA3A4A7A8X SH07ZB3B4B7B8X Valve UQ07A3A4A7A8MB/C/D/E Air InletRearConnection InsideRemote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Way Function Using with the indoor unitSelecting with the Remote Control To obtain anSelecting the Automatic Operating Mode SET TempCooling Your Room Fan speed when heating Heating Your RoomChanging the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically When Adjust the blade to faceAdjusting the Air Flow Direction Horizontally Setting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationMode Outdoor Temperature Indoor Temperature Indoor Humidity Temperature and Humidity RangesCleaning Your Air Conditioner If the air conditioner is used at ThenSolving Common Problems Technical Specifications Installing a Filter OptionModel Indoor unit Power Supply Package Weight Model Paper Plastic WoodThis AIR Conditioner is Manufactured by