Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Problem

Explanation/Solution

The air conditioner does not operate at all

◆Check that the breaker used for the air conditioner is switched on.

◆Check that the operation indicator on the indoor unit is on;

if necessary press the button on the remote control.

◆Check whether the Timer indicator on the indoor unit is switched on. If so:

-Wait until the switch-on time is reached and the air conditioner starts up automatically

-Cancel the timer (see pages 16 and 17 for further details)

The air conditioner does not operate with the remote control

◆Check that there are no obstacles between you and the indoor unit.

◆Check the remote control batteries.

◆Check that you are close enough to the indoor unit (seven meters/ yards or less).

No beep is heard when you press		◆ Check that you are pointing the remote control at the remote control
the	on the remote	sensor in the right of the indoor unit.
control		◆ Replace the remote control batteries if necessary.

The air conditioner does not cool		◆ Check that the correct operating mode has been selected (Auto,
		Cool).

◆The room temperature may be too low.

◆Dust may be blocking the air filter guard; refer to page 23 for cleaning instructions.

◆Check that there is no obstacle in front of the outdoor unit.

The fan speed does not change		◆ Check that the operating mode is set to the Auto, Cool or Fan mode ;
when you press the	button	in the Dry mode, the fan speed changes automatically.

The air flow direction does not	◆ Check that the air conditioner has been switched on; if necessary,
change when you press the	press the	button on the remote control.
button

The timer is not correctly triggered	◆ Check that the timer has been programmed correctly; see pages 16
	and 17.

Odour is permeated in the room	◆ Air the room.
during air conditioning

E-22