WATER SUPPLY CONNECTOR FILTER
| inlet water |
|
| valve |
|
1.Pull out the filter and wash well. | 2. Pull in the filter and connect | 3. Check if there is a leakage. |
| the hose to the inlet water | Note to tighten up the |
| valve tightly. | connector. |
CLEANING THE FILTER NET | Clean the filter net often to keep the washer clean. |
|
1. Push the upper part | 2. Open the cover as | 3. Clean the filter. | 4. Close the cover and insert the |
of the filter and pull in. | shown in the figure. |
| lower part of the filter in the |
|
|
| basket first and then push the |
|
|
| filter with "click" sound . |
|
|
|
|
HOW TO CLEAN THE FILTER
1 | . Place a rag under the washer filter not to wet the floor. |
| (pump drained washer) | ||
2 | . Rotate the filter counterclockwise |
|
| 1. | Place a rag under washer filter not to wet the floor. |
| and pull out the filter. |
|
| 2. | Turn the |
3 | . Remove dirts and rotate | open | close | 3. | Take the filter out and |
| the filter clockwise |
|
| 4. | remove dirts. |
| until it locks in position. |
|
| Reassemble in | |
|
|
|
|
| reverse order. |
10