Washing Procedure

Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)

FUZZY(DIGITAL) COURSE

Selects the best washing course	POWER	START/
Selects the best washing course	POWER	HOLD
automatically.

1.Press the POWER Button to"ON".

2.Press the START/HOLD button.

Water level is selected automatically. Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

3.Close the lid.

❈Select the Silver Wash button to perform anti-bacteria washing.

POWER	COURSE	START/
		HOLD
BLANKET COURSE

1.Press the power button to "ON".

2.Press the course select button once.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid.

❈Select the Silver Wash button to perform anti-bacteria washing.

SUPER CLEAN	COURSE	POWER	COURSE	START/
				HOLD
Use for cleaner washing.

1.Press the power button to "ON".

2.Press the course select button two times.

3.Press the START/HOLD button and put the proper amount of detergent into tub.

Water level is selected automatically.

Water level is only selected MAXIMUM ~ MEDIUM.

4.Close the lid.

The washing finishes by the time you reserved.

❈The tempering feature is included in the Super Clean course. This is why the additional tempering course is not selected.

❈Select the Silver Wash button to perform anti-bacteria washing.

Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent

for the fabrics you are washing.

SPEEDY COURSE		POWER	COURSE	START/
SPEEDY COURSE		POWER	COURSE	HOLD
Because	washing is speedy, it is			HOLD
Because	washing is speedy, it is
good for	light or less stained laundry.

1.Press the power button to "ON".

2.Press the course select button three times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

❈Select the Silver Wash button to perform anti-bacteria washing.

WOOL COURSE	POWER	COURSE	START/
WOOL COURSE	POWER	COURSE	HOLD
1.Press the power button to "ON".
2.Press the course select four times.
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

❈In the Wool course, the Silver Wash course does not work as it could damage the washed items.