Operations
Control panel
02 |
|
|
| 08 |
01 |
|
|
|
|
03 | 04 | 05 | 06 | 07 |
|
|
|
| 09 |
01 | Cycle Selector | Turn the dial to select a cycle. | |
|
|
| |
02 | Display | The display shows current cycle information and estimated time | |
remaining, or an information code when a problem occurs. | |||
|
| ||
|
|
| |
03 | Temp. | Press to change the water temperature for the current cycle. |
Press to change the spinning speed for the current course.
•Rinse Hold (No indicator) : The final rinse process is suspended so
04 Spin | that the laundry remains in the water. To unload the laundry, run a |
| drain or spin process. |
• | No Spin : The drum does not spin after the final drain process. |
| Press to select an option from Intensive( | ), Prewash( | ), Rinse+( ), | |
05 Options | Intensive( ) + Prewash( ), Intensive( | ) + Rinse+( | ), Prewash | |
( ) + Rinse+( ), Intensive( ) + Prewash( ) + Rinse+( ). Press | ||||
| ||||
| again to deselect. |
|
| |
|
| |||
| Delay End lets you set the end time of the current cycle. Based | |||
| on your settings, the start time of the cycle will be determined by | |||
06 Delay End | the machine’s internal logic. For example, this setting is useful for | |||
programming your machine to finish a wash at the time you normally | ||||
| ||||
| return home from work. |
|
|
•Press to choose a preset unit of hours.
Operations
English 29
2016/8/10 15:48:16