Water Supply Connector Filter

open close

1.Pull out the filter and wash well.

inlet water valve

2.Pull in the filter and connect the hose to the inlet water valve tightly.

3.Check if there is a leakage. Note to tighten up the connector.

CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.

1.Push the upper part of the filter and pull in.

2. Open the cover as	3. Clean the filter.	4. Close the cover and insert the
shown in the figure.		lower part of the filter in the
		basket first and then push the
		filter with "click" sound .

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.

2. Rotate the filter counterclockwise and pull out the filter.

3. Remove dirts and rotate

the filter clockwise until it locks in position.

1.Place a rag under washer filter not to wet the floor.

2.Turn the filter-cap to the left.

3.Take the filter out and

remove dirts.

4. Reassemble in reverse order.