Samsung WA11RAS3EG/XSV manual Washing Procedure

Page 6

WASHING PROCEDURE

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)

FUZZY(DIGITAL) COURSE

Selects the best washing course

POWER

START/

HOLD

automatically.

 

 

1.Press the POWER Button to"ON".

2.Press the START/HOLD button.

Water level is selected automatically. Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

3.Close the lid.

POWER

COURSE

START/

HOLD

BLANKET COURSE

 

 

 

1.

Press the power button to "ON".

2.

Press the course select button once.

3.

Press the START/HOLD button

 

Water level is selected automatically.

Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent

for the fabrics you are washing.

WOOL COURSE

POWER

COURSE

START/

HOLD

 

 

 

1.Press the power button to "ON". 2.Press the course select four times. 3.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

4. Close the lid.

SUPER CLEAN COURSE POWER

COURSE

START/

HOLD

Use for cleaner washing.

 

 

 

1.

Press the power button to "ON".

2.

Press the course select button two times.

DELAY START POWER COURSE Select this course when

you have to go out or do something else.

1.Press the power button to "ON".

2.Press the course select button.

3.Press the DELAY START button once.

You may change the delay start time with

DELAY START/

START HOLD

3.

Press the START/HOLD button and put

 

the proper amount of detergent into tub.

 

Water level is selected automatically.

 

Water level is only selected MAXIMUM ~ MEDIUM.

4.

Close the lid.

 

The washing finishes by the time you reserved.

SPEEDY COURSE

POWER

COURSE

START/

Because washing is speedy, it is

HOLD

 

 

 

 

 

good for light or less stained laundry.

 

 

1.Press the power button to "ON".

2.Press the course select button three times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

use the DEALY START button. (from 3 hours to 18 hours)

4.Press the START/HOLD button and put the proper amount of detergent into tub.

5.Close the lid.

The washing finishes by the time you reserved.

SILVER WASH COURSE POWER

SILVER

START/

A course where bacteria hidden

WASH

HOLD

 

 

inside the laundry are removed before it is Silver Nano-coated for avoiding the propagation of harmful germs.

1.Press the power button to "ON".

2.Press the SILVER WASH button.

3.Press the START/HOLD button and put.

4.Close the lid.

The washing finishes by the time you reserved.

5

Image 6
Contents Manual Functions Installation & Maintenance Troubleshooting SpecificationsFeatures Super CleanCHILD-LOCK Function Safety Instructions Pulsator Front Control Panel Spin Basket Power Cord Ground LeadFilter LIDControl Panel Washing Procedure Manual Functions Wash + Spin + Silver Wash Rinse + Spin + Silver WashWash + Rinse + Spin + Silver Wash Installation & Maintenance Connecting the Water Supply HoseEnvironment Assembling the RAT Protection Panel Connecting the Drain HoseHOW to PUT the Detergent Case of PUMP-DRAINED WasherWater Supply Connector Filter HOW to Clean the FilterPump drained washer Is the water tap opened? TroubleshootingIs the washer plugged in? Washer? Is the power cut off? Is there enough water? Flat surface?Specifications Case the Need for Servicing Arises