
Installation and Connection
EN | ● This appliance is NOT intended for use in a commercial environment. |
|
●Please observe the installation instructions provided and note that this appliance should only be installed by a qualified technician.
●The appliance is fitted with a plug and must only be connected to a properly installed earthed socket. The fuse protection must be rated at 16 amps (L or
●In case a new socket is need, installation and cable connection must only be done by a qualified electrician. If the plug is no longer accessible following installation, a pole discon- necting device must be present on the installation site with a contact gap of at least 3 mm.
●Adapters, multiway strips and extension cords must not be used. Overloading can result in fire.
●Plug in
When the appliance has been connected for the first time, all segments are lit for a second. After 3 seconds, 12:00 flashes in the display prompting you to select the clock. Do not forget to reset the clock when you switch to and from summer or winter.
min ![]()
550
min 564 max 568
min 446 |
|
max 450 | 50 |
460
200 cm2
595
520
6