Samsung AQ18AWAXSER, AQ18AWANSER, AQ24AWANSER Setting the Timer, To deactivate the On timer

Page 20

SETTING THE TIMER

This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically.

On timer

This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is on/off.

1.Press the On button on the remote control.

On timer indicator blinks on the remote control display.

2.Set the time you want the air conditioner to turn on automatically.

Press the Up or Down button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing by 30 minute intervals up to the first 3 hours and then hourly after the first 3 hours.

3. Press the Set/Cancel button on the remote control to activate.

The remote control display will show the hour(s) you have set.

The air conditioner will operate automatically at the set time and then the On timer indicator disappears. If the On timer is not set within 10 seconds, the air conditioner will end setting.

4.Set the operating mode.

Press the Mode button on the remote control until the desired mode appears on the remote control display.

The air conditioner will operate in the mode you set.

On timer function is available in Auto/Cool/Dry/Fan/Heat mode.

Temperature can also be adjusted. (See step 3 on page 15 for instructions.)

After the timer has been set and the unit is turned off, all indicators will turn off except the On timer indicator and the remaining time in approximately 10 seconds.

Change the timer setting by pressing the ON button, pressing the Up/Down button to change the time, then press the Set/Cancel button to activate.

To deactivate the On timer

1.Press the Set/Cancel button on the remote control.

The set time will cancel and the On timer indicator will disappear.

Montblanc2_IB_29002A_E.indd 21

using advanced functions _21

2008-1-15 17:20:35

Image 20
Contents Cool Summer Offer Cost Efficient SystemLook for Everywhere Only a series modelSevere Warning Signs Safety informationSafety Information Use an exclusive power source for the air conditioner Ensure no water gets into the air conditioner Potential risk of personal injury or burn Make sure there are no obstacles under the indoor unit Contents Using Advanced Functions Viewing your air conditioner before use Checking the Indoor Unit and Digital DisplayMain parts Indoor unit digital displayChecking the Outdoor Unit Power button and Room temperature sensorRemoving the Front Panel Checking the Remote Control Digital On/OffInstalling the batteries Remote control displayUsing the remote control Selecting Operation Mode Operating basic functionTurning the AIR Conditioner on and OFF AutoCool Dry Fan Heat For AQA model Horizontal air flow Adjusting the AIR Flow DirectionVertical air flow To deactivate Turbo function Using advanced functionsUsing the Turbo Function To deactivate the On timer Setting the TimerOn timer To deactivate the Off timer Setting TimerOff timer Combining On timer and Off timer To deactivate the timer combinationMode Temperature changes in mode To deactivate modeUsing the Function only a Series Model Using the Energy Saving Function To deactivate the Energy saving functionUsing the Evaporator Clean Function Cleaning and maintaining the air conditioner Cleaning the ExteriorCleaning the Filter Air filterDNA filter Deodorizing filter Replacing the FilterMaintaining Your AIR Conditioner Troubleshooting AppendixMode Operating Conditions If OUT of Conditions Operation RangesInstallation and Maintenance Montblanc2IB29002AE.indd 2008-1-15 Questions or COMMENTS? Air Conditioner
Related manuals
Manual 1 pages 12.81 Kb Manual 1 pages 10.71 Kb Manual 36 pages 15.58 Kb