Samsung MAX-X66R/EDC Listening to a Cassette, CD Synchro Record Feature, Recording a Compact Disc

	Listening to a Cassette
	Always treat your cassettes with care; refer, if necessary, to
	the section entitled “Precautions When Using Audio Cassettes”
	on page 23.
1	Switch the system on by pressing the STANDBY/ON button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette TAPE1 or 2 by pushing and releasing the Tape
4	cover where PUSH EJECT (	) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the Tape by pushing on it until it clicks into place.
	Result: Depending on the Tape selected, the 1 or 2 indication is
	displayed in front of the counter number.
6	If you have inserted two cassettes, press TAPE1/2 on the front panel
	or directly the TAPE1/2 button on the remote control to select the

cassette to be played.

Result: Depending on the Tape selected, the TAPE 1 or TAPE 2 indication is displayed.

7
	To listen to...		Press ...
	Side A	TAPE (	) once	DECK 1 and DECK 2
	Side B	TAPE (	) twice	DECK 2 Only

Result: The cassette starts playing.

When the cassette is stopped, select one of the following functions as required or on the remote control.

8Main Unit

To...Press...

Rewind the cassette

Fast-forward the cassette

Remote Control

To...Press ...

Rewind the cassette

Fast-forward the cassette

9 To... Press ...

Stop the playback

	8	8
6	1	9
		2,7

CD Synchro Record Feature

ENG

You can record a compact disc on a cassette in two different ways:

Synchronize recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Select the CD function by pressing MP3-CD/CDon the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD SYNC. or press CD SYNC.
	directly to start recording at the beginning of the disc.

Result: REC and SYNC are displayed and recording starts.

7 To stop recording, press .

7

1

3

6

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Select the CD function by pressing MP3-CD/CDon the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press			on the front
	panel or	on the remote control to set the compact disc player to Pause
	mode.
7	Press the REC/PAUSE.
	Result: REC is displayed.
8	Press the		to start playing the track.

Result: The track is recorded on the cassette.

9 To stop recording, press .

9

1

7

3,6,8