Samsung VC8932EN3S/BOL, VC8927EN3S/BOL, VC8932ET3S/ERP Assembling the VACUUM-CLEANER Ready for USE

Page 4

DJ68-00093B(EN) 5/20/02 8:01 PM Page 4

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

1) Connect the suction hose to the suction tube.

2) Adjust the suction tube(depending on model).

 

EXTENDING : Holding the narrow part of

 

the telescopic tube with one

 

hand, push the handle in the

 

opposite direction with your

 

other hand.

 

SHORTENING : Holding the narrow part of

 

the telescopic tube with

 

one hand, pull the handle

 

towards it using the other hand.

OPTION : Connect the suction tubes together.

NOTE : Adjustable telescopic tube is not

available with all models.

 

3) Connect the nozzle to the suction tube.

4) Open the hose connection cover.

5)Connect the body connector to the body of the cleaner.

3

Image 4
Contents Vacuum Cleaner Features Important SafeguardsIdentifications of Parts Assembling the VACUUM-CLEANER Ready for USE Power Cord ON/OFF SwitchAuto Mode Button Control Type only Using Exbug Elimination System Depending on ModelUsing the Accessories Transporting and Storing the Vacuum CleanerPark Position Crevice DustingReplacing the Dust BAG DUST-FULL IndicatorFor Cloth Filter BAG Maintenance or Replacement of the Filters Inlet FilterUsage of Floor Nozzle Transparent TubeFor RUG / Floor Selector For Universal BrushTrouble Shooting Problem Cause RemedyDJ68-00093B REV0.2