Samsung VC8932EN3S/BOL manual Replacing the Dust BAG, For Cloth Filter BAG, DUST-FULL Indicator

Page 8

DJ68-00093B(EN) 5/20/02 8:01 PM Page 8

REPLACING THE DUST BAG

1)To open the dust cover of the dust bag com- partment, press the clamper upwards(the clam- per is located at the front of the dust cover).

3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position.

2) Remove the dust bag from the cleaner

4)Press the dust cover down gently until the clamper relocks.

NOTE : Used dust bags can be sealed by removing the film from the paper and sticking over the suction opening.

FOR CLOTH FILTER BAG

After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

DUST-FULL INDICATOR

If the “Dust-Full” indicator switch changes to “RED” while you are cleaning, the dust bag is full and must be replaced.

NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.

7

Image 8
Contents Vacuum Cleaner Features Important SafeguardsIdentifications of Parts Assembling the VACUUM-CLEANER Ready for USE Power Cord ON/OFF SwitchAuto Mode Button Control Type only Using Exbug Elimination System Depending on ModelUsing the Accessories Transporting and Storing the Vacuum CleanerPark Position Crevice DustingFor Cloth Filter BAG DUST-FULL IndicatorReplacing the Dust BAG Maintenance or Replacement of the Filters Inlet FilterUsage of Floor Nozzle Transparent TubeFor RUG / Floor Selector For Universal BrushTrouble Shooting Problem Cause RemedyDJ68-00093B REV0.2