Samsung CE1071/BOL manual Power Levels and Time Variations, Stopping the Cooking

Power Levels and Time Variations

The power level function enables you to adapt the amount of energy dissipated and thus the time required to cook or reheat your food, according to its type and quantity. You can choose between six power levels.

Power Level	Percentage	Output
HIGH	100 %	900 W
MEDIUM HIGH	67 %	600 W
MEDIUM	50 %	450 W
MEDIUM LOW	33 %	300 W
DEFROST	20 %	180 W
LOW	11 %	100 W

The cooking times given in recipes and in this booklet correspond to the specific power level indicated.

If you select a...	Then the cooking time must be...
Higher power level	Decreased
Lower power level	Increased

Stopping the Cooking

You can stop cooking at any time so that you can:

•Check the food

•Turn the food over or stir it

•Leave it to stand

To stop the cooking...	Then...
Temporarily	Open the door.
	Result:	Cooking stops.
	To resume cooking, close the door again and press
	the Start(	) button.
Completely	Press the Stop button.
	Result:	Cooking stops.
	If you wish to cancel the cooking settings, press the
	Stop button again.

Adjusting the Cooking Time

You can increase the cooking time by pressing +30s button once for each
30seconds to be added.	EN

•Check how cooking is progressing at any time simply by opening the door

•Increase the remaining cooking time

To increase the cooking time of your food, press the

Start( ) button once for each 30 seconds that you wish to add.

•Example: To add three minutes, press the Start( ) button six times.

Using the Auto Cook Feature

The five Auto Cook( ) features include/provide pre-programmed cooking times. You do not need to set either the cooking times or the power level.

You can adjust the size of the serving by turning the dial knob.

Use only recipients that are microwave-safe.

Open the door. Place the food in the centre of the turntable. Close the door.

1. Press the Auto Cook( ) button.

2. Select the type of food that you are cooking by pressing

the Auto Cook( ) button. Refer to the table on the following page for a description of the various pre- programmed settings.

3. Select the size of the serving by turning the dial knob.

4.Press the Start( ) button.

Result: The food is cooked according to the pre-

programmed setting selected.

When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.

9