MB QUART ALX2PS, ALX525IW, ALX80IC, ALX525IC, ALX65IW, ALX65IC, ALX80IW Alexxa Speaker Specifications

ADDITIONAL INSTALLATION AND OPERATIONAL INFORMATION

-If you do not have the installation cut-out template, the cut-out dimensions are also located on the speaker label located on the side of the speaker. You can also down load the template by going to our web

site at: www.maxxsonics.com-

- The speaker trim bezels and grilles can also be spray painted.

There is a paint shield located in the speaker kit to prevent from getting paint on the speaker cone. Tip: Do not use roll-on paint because it will fill-in the holes in the grille which will dramatically effect the sound quality.

Be sure to paint the grille separate from the speaker and do not re-install the grille until the paint has dried.

-You may order additional parts such as Dog-Ear Clamps, Grilles, Grille removal tools by contacting Maxxsonics at: www.maxxsonics.com

In-Ceiling

Speaker

Angled Baffle Adjustment

The Alexxa series speaker feature an angled baffle design which positions the speaker on a 30% angle to the speaker enclosure. This allows you to rotate the speaker enclosure so that the speaker cone is facing towards the listening area as shown on Diagram 4. This is ideal for cathedral or pitched ceilings or walls do not permit the ideal mounting locations.

Or Or

Tweeter Angle Adjustment

The tweeter element can be swivelled to allow you to aim or point the tweeter towards the listening area as shown above. In the event the mid bass speaker can not be aimed towards

In-Wall Speaker

Mid Range Speaker

Or

Tweeter Element

Or

Mid Range Speaker

Tweeter Angle Adjustment

The tweeter element can be swivelled to allow you to aim or point the tweeter towards the listening area as shown above. In the event the mid bass speaker can not be aimed towards

ALEXXA SPEAKER SPECIFICATIONS

MODEL	POWER RATING	IMPEDANCE	CUT-OUT
ALX2PS	5 - 20 WATTS	8-Ohms / 6-Ohms nom.	3.9” / 99mm Diameter
ALX3PS	5 - 30 WATTS	8-Ohms / 6-Ohms nom.	4.35” / 111 mm Diameter
ALX5.25IC	80 WATTS	8-Ohms / 6-Ohms nom.	8.9” / 227mm Diameter
ALX6.5IC	100 WATTS	8-Ohms / 6-Ohms nom	10.25” / 260mm Diameter
ALX6.5IC DM	100 WATTS	4+4-Ohms / 3+3-Ohms nom.	10.25” / 260mm Diameter
ALX8.0IC	120 WATTS	8-Ohms / 6-Ohms nom.	12.4” / 315mm Diameter
ALX5.25IW	80 WATTS	8-Ohms / 6-Ohms nom.	W: 7.26” / 184.5mm x L: 14.1” / 358mm
ALX6.5IW	100 WATTS	8-Ohms / 6-Ohms nom.	W: 7.9” / 200.5mm x L: 14.1” / 358mm
ALX8.0IW	120 WATTS	8-Ohms / 6-Ohms nom.	W: 10.3” / 262mm x L: 20.2” / 513mm

FEATURES SUBJECT TO CHANGE WITH OUT NOTICE 6