M-Audio DSM2 manual Technical Specifications

Page 23

appendix a

Specifications

Technical Specifications

DSM2 Specifications

LF Driver

8.0-inch inverted anodized aluminum cone woofer with cone edge reinforcement

 

35mm voice coil with symmetrical force motor and flux stabilization rings

 

 

HF Driver

1-inch soft teteron dome tweeter with neodymium magnet and ferrofluid cooling

 

 

Frequency Response

42 Hz–27 kHz +/–3 dB

 

 

Crossover

2.7 kHz Linkwitz-Riley 24 dB/octave

 

 

Max SPL @ 1 meter

111 dB maximum peak SPL @ 1m for 1 unit (117 dB maximum peak per pair)

 

 

Input Sensitivity

+4 dBu pink noise input with Trim level set to 0 dB yields 90 dB @ 1m

 

 

LF power amplifier

100 W (1% THD into 6 Ohms)

 

 

HF power amplifier

80 W (0.5% THD into 6 Ohms)

 

 

THD+N

<0.05% (10 W into 6 Ohms)

 

 

Soft Limit feature

Independent anti-clipping limiters: tweeter limited to 0.5% THD, woofer limited to 5% THD

 

 

Power Requirements

User selectable for 90–130V~ 50/60 Hz or 180–264V~ 50/60 Hz

 

 

DSP

36-bit, 192 kHz processing

 

 

Protection

Over current, over temperature, turn-on/off transient, subsonic filter

 

 

Analog Inputs

XLR balanced (20 kOhms) and 1/4-inch TRS balanced (20kOhms)

 

 

Digital Inputs

S/PDIF In and Thru (75 Ohms) and AES/EBU (110 Ohms);

 

built-in phase-lock loop (PLL) to reclock incoming bitstreams with low jitter (<250 psec p-p);

 

44.1, 48, 88.2, 96, 176.4, 192 kHz sample rates

 

 

Indicator

RGB LED

 

 

Appendix A: Specifications 17

Page 22 Page 24
Image 23
Page 22 Page 24
Contents User Guide Precaucion Important Safety Instructions Page Contents Vi M-Audio Studiophile DSM2 Guide Amplifiers FeaturesWhat’s in the Box? About the SpeakersDrivers Digital Signal ProcessingInputs EnclosureOverview of the DSM2 Speaker Back Panel Connectors and ControlsPower Connections Digital Inputs Volume Trim ControlEQ Settings Digital Channel AssigmentFront Panel LED Front PanelUnpacking the Speakers Setting Up the SpeakersReusing the Speaker Packaging Getting StartedSpeaker Location Speaker OrientationInstalling a Fuse Configuring and Connecting AC PowerSetting the Voltage Connecting Analog Inputs Power Up and Power DownConnecting Audio Connecting PowerPdif Input Pdif Thru Digital Input AES shown Connecting Digital InputsVolume Trim Settings Configuring Speaker SettingsSetting the Mid-Range EQ Setting the High Frequency Shelf EQSetting the Desktop Filters Setting the LF Shelf EQSetting the High-Pass Filter Tips for Best Performance Desktop 175 Hz Filter switches and settingsTroubleshooting Technical Specifications SpecificationsReference Diagrams LF Shelf levels Desktop EQ 220 Hz levels Desktop EQ 200 Hz levels Appendix a Specifications Audio Studiophile DSM2 Guide Warranty ML07-243A0DSM2UGEN08/08

DSM2 specifications

The M-Audio DSM2 is a groundbreaking studio monitor designed to elevate the listening experience for musicians, producers, and audio engineers. This innovative speaker combines advanced technology, exceptional sound accuracy, and professional-grade features, making it a standout choice for both home studios and commercial recording environments.

At the heart of the DSM2 is its DSP-driven design, which utilizes advanced digital signal processing to deliver precise sound reproduction. This technology ensures that mixes translate well across various playback systems, allowing users to make informed decisions about their audio. The DSM2 features a 5-inch low-frequency driver and a 1-inch high-frequency tweeter, which work together to produce a balanced frequency response across the entire audio spectrum, from deep bass to crystalline highs.

One of the standout features of the M-Audio DSM2 is its extensive room adaptation capabilities. Equipped with a rear-panel EQ section, the monitor allows users to tailor the sound characteristics to their specific room environment. With high-frequency and low-frequency filters, users can optimize the DSM2’s performance to counteract acoustic anomalies typically found in various studio setups. This flexibility ensures that users can achieve accurate sound reproduction, regardless of their studio’s acoustic challenges.

The DSM2's built-in amplification further enhances its performance. The bi-amped design employs dedicated amplifiers for the woofer and tweeter, resulting in more efficient power distribution and minimizing distortion. This design allows the monitor to maintain clarity and detail even at higher volume levels, making it suitable for both critical listening and casual playback.

In addition to its acoustic prowess, the M-Audio DSM2 also emphasizes user-friendly connectivity. It features balanced XLR and TRS inputs, ensuring compatibility with a wide range of audio interfaces and mixing consoles. This makes it easy for producers and engineers to integrate the DSM2 into their existing studio setups.

Overall, the M-Audio DSM2 is a top-tier studio monitor that combines innovative technology, versatile features, and exceptional sound quality. Its DSP-driven design, room adaptation capabilities, powerful amplification, and user-friendly connectivity make it an ideal choice for professionals seeking precise audio representation. Whether for tracking, mixing, or mastering, the DSM2 proves to be an invaluable tool in any sound engineer's arsenal.
Top Page Image Contents