Samsung DVD-R120E/EUR manual Setting up the Progressive scan, Canceling the Progressive scan

System Setup

Setting up the Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy.

1 With the unit in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear. Press the œ √ buttons to select Yes, and then press the OK button.

Press [Yes] to confirm Progressive scan mode.

Otherwise press [No]

Yes No

2 The message “Please set your TV to Progressive input. To deactivate, press [STOP] key.” will appear. Press the OK button.

Please set your TV to Progressive input.

To deactivate, press [STOP] key.

OK

3 The message “Video Output Mode Progressive Scan” will appear.

Video Output Mode

Progressive Scan

Canceling the Progressive scan

1 With the unit in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Interlace scan mode. Otherwise press [No]” will appear. Press the

œ√ buttons to select Yes, and then press the OK button.

Press [Yes] to confirm Interlace scan mode.

Otherwise press [No]

Yes No

2 The message “Please set your TV to Interlace input. To deactivate, press [STOP] key.” will appear. Press the OK button.

Please set your TV to Interlace input,

To deactivate, press [STOP] key.

OK

3 The message “Video Output Mode Interlace Scan” will appear.

Video Output Mode

Interlace Scan

■ Do not press the P.SCAN button if you

NOTE

are using a TV that does not support Progressive mode. Nothing will be displayed on the screen if pressed.

■ Progressive setting is only available when

■ If you press the P.SCAN button by

mistake when your TV does not support

NOTE

the Video Out is set to Component.

Progressive mode, you need to release

■If the P.SCAN button on the DVD recorder’s front panel is pressed during playback, the message “This function is only available in stop mode” appears on the screen.

■Progressive setting is only available when the DVD recorder is in stop mode.

the Progressive mode. To release the

Progressive mode, press the P.SCAN

button on the front panel 3 times.

The screen will recover after the PS

LED on the front panel display turns off.

36- English