Loading and Changing Compact Discs
GB
The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos- ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on
| page 25. | ||
|
|
|
|
1 | Switch the system on by pressing Standby/on. | ||
2 | Press the Open/Close( |
| ) button on the front panel. |
| Result: The compartment opens. | ||
3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.
Check that the compact disc has been correctly inserted in the holder before closing the compartment.
4 | If you wish to load a third compact disc, press the Disc Change but- | ||
| ton on the front panel (or Disc Skip on the remote control). | ||
| Result: The carrousel rotates by 120°. | ||
5 | Close the compartment by pressing the Open/Close( |
| ) button |
| |||
| again. | ||
If you wish to start playing a disc directly, you can also proceed as follows.
To play... | Press... |
| |||
Disc 1 | CD ( |
|
|
| ) or Disc 1 |
|
|
| |||
Disc 2 | Disc 2 |
| |||
Disc 3 | Disc 3 |
| |||
Result: The compartment closes automatically and the disc selected starts playing.
6 To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it, to prevent dust from entering.
You can load or unload compact discs when the radio, tape or auxiliary source function is selected.
| 2,5 |
5 | 4 |
5 |
|
1 |
|
To replay the CD/MP3-CD
This is a player that enables the playback of audio CD,
Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.
At least more than one CD should be inserted for playbacks.
1 Press the On/Standby button to switch on the power.
2 Press the CD( 
) of the main unit to select the CD function.
3 | Insert more than one CD or a |
|
|
|
| ||||
4 | Press the CD( |
|
|
| ) button of the main unit or the |
|
|
| button of the |
|
|
|
| ||||||
|
|
|
| ||||||
| remote control. |
|
|
|
|
|
|
|
|
If there is more than one CD or an
Your CD Player will take a few moments to scan through all the tracks recorded on a particular
The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased
The English name of the track may not be indicated depending on the characteristics of the
<CD Playback> | <During the |
1 | 1 |
2 | 2 |
3 | 3 |
| |
Track Indicator | Track Indicator |
Playtime Indicator | Title(Directory) Indicator Playtime Indicator |
5 Adjust the volume according to needs with the following procedures.
Turn the Volume control of the main unit. or
Press the VOL. + or – button of the remote control.
6 If it is desired to stop while the playback is processing, press the CD( 
) button.
Press the CD( 
) button once again to playback again.
7 To stop playback, press the | button. |
A new disc may be inserted in the remaining two compart- ments excluding the CD which is being played back. Press the Disc Changer button to open the CD tray. The revolving part does not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”.
If the CD Repeat function is not selected, 3 CDs are played back which automatically stops.
5 |
2,4,6 |
7 |
1 |
10