Samsung MAXZB450RH/SPX Timer Function, Press Timer/Clock until, You must also, Press Enter

Timer Function

The timer enables you to switch the system on or off at spe- cific times.

Example: You wish to wake up to music every morning.

GB

If the timer switch on and off times are identical, the word ERROR is displayed.

	If you no longer want the system to be switched on or off auto-
	matically, you must cancel the timer.
	Before setting the timer, check that the current time is cor-
	rect.
	For each step, you have a few seconds to set the required
	options. If you exceed this time, you must start again.
1	Switch the system on by pressing Standby/On.
2	Press Timer/Clock until	TIMER is displayed.
3	Press Enter.
	Result: ON TIME is displayed (instead of the equalizer symbols)
	for a few seconds, followed by any switch-on time already
	set; you can set the timer switch-on time.
4	Set the timer switch-on time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: OFF TIME is displayed (instead of the equalizer sym- bols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the vol- ume already set.

6 Press Tuning Down and Up to adjust the volume level and press

Enter.

Result: The source to be selected is displayed.

7	pressing the	/	buttons to select the source to be played
	when the system switches on .
	If you select...		You must also...
	TAPE (cassette)		Insert a recorded cassette in one of the
			decks before setting the system to stand-
			by.
	TUNER (radio)		a Press Enter.

bSelect a preset station by pressing the

/ buttons.

2	3,4,5,6,7,8
	4,5,6,7
	4,5,6,7
1,9

To set the timer function

You can also use Program/Set button on the remote control to instead Enter button in step 3,4,5,6,7,8.

CD (compact disc) Load one or more compact discs.

8

9

Press Enter to confirm the timer.

Press Standby/On to set the system to standby mode.

Result: appears on the front panel display next to the time, indi- cating the timer has been set. The timer automatically turns the system on or off at a designated time.

21