Loading and Changing Compact Discs
The disc changer can contain up to three 12 cm or 8 cm com- pact discs without using an adapter.
Never force the compact disc carrousel when opening and closing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 26.
1 | Switch the system on by pressing ECO/STANDBY/ON. | ||
2 | Press the OPEN/CLOSE( |
| ) button on the front panel. |
| Result: The compartment opens. | ||
3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.
Check that the compact disc has been correctly inserted in the holder before closing the compartment.
4 | If you wish to load a third compact disc, press the DISC CHANGE | ||
| button on the front panel (or DISC SKIP on the remote control). | ||
| Result: The carrousel rotates by 120°. | ||
5 | Close the compartment by pressing the OPEN/CLOSE( |
| ) button |
| |||
| again. | ||
If you wish to start playing a disc directly, you can also proceed as follows.
To play... | Press... |
|
|
|
Disc 1 | VCD/CD ( |
|
| ) or Disc 1 |
|
| |||
Disc 2 | Disc 2 |
|
|
|
Disc 3 | Disc 3 |
|
|
|
Result: The compartment closes automatically and the disc selected starts playing.
6 To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it, to prevent dust from entering.
You can load or unload compact discs when the radio, tape or auxiliary source function is selected.
The function will be automatically entered VCD/CD from the other source when you press CD OPEN/CLOSE button.
4 |
2,5 |
5 |
1 |
5 |
// |
To replay the CD/MP3
GB
This is a player that enables the playback of audio CD,
Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.
At least more than one CD should be inserted for playbacks.
1 | Press the ECO/STANDBY/ON button to switch on the power. |
|
| ||||
2 | Press the VCD/CD( |
|
|
| ) of the main unit to select the CD function. | ||
|
|
| |||||
|
|
| |||||
3 | Insert more than one CD or a |
|
| ||||
4 | Press the VCD/CD( |
|
|
| ) button on the front panel or the |
| but- |
|
|
| |||||
| ton of the remote control. |
|
| ||||
| If there is more than one CD or an | ||||||
| replays are then processed in order. |
|
| ||||
| Your CD Player will take a few moments to scan through | ||||||
| all the tracks recorded on a particular |
|
| ||||
5 | Adjust the volume according to needs with the following procedures. | ||||||
Turn the VOLUME control on the front panel or
Press the VOLUME + or – button on the remote control. 
The volume level can be adjust in 31 steps(VOL MIN,VOL
1- VOL 29,and VOL MAX).And press ENTER/DISPLAY button to select the horizontal display or the vertical display in it.
6 If it is desired to stop while the playback is processing, press the VCD/CD( 
) button.
Press the VCD/CD( 
) button once again to playback again.
7 To stop playback, press the | button. |
A new disc may be inserted in the remaining two compart- ments excluding the CD which is being played back.
Press the DISC CHANGER button to open the CD tray. The revolving part does not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is indicat- ed as “NO DISC”.
If the CD Repeat function is not selected, 3 CDs are played back which automatically stops.
1 |
|
2,4,6 | 5 |
| |
| // |
| 7 |
| 5 |
| 11 |