Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietist sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
GB
In Stop or no
1 disc mode, press MENU button.
MOVE | ENTER | EXIT |
2 | Press Cursor | but- | 3 | Press Cursor | button | ||||||
ton to move to ‘Audio’ | to move to ‘TEST | ||||||||||
|
|
|
| ||||||||
|
| and then press |
|
| TONE’ and then press | ||||||
|
| ENTER button. |
|
| ENTER button. |
|
| ||||
|
|
|
|
|
| • The test tone will be sent to L ➝ C ➝ | |||||
|
|
|
|
|
| ||||||
|
|
|
|
|
| R ➝ SR ➝ SL ➝ SW in order. | |||||
|
|
|
|
|
| If the ENTER button is pressed again | |||||
|
|
|
|
|
| at this time, the test tone will stop. | |||||
|
| MOVE ENTER | EXIT |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| MOVE ENTER RETURN | EXIT |
| |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |
In Stop or no disc |
|
| Press Cursor |
|
| button to move to | |
1 mode, press | 2 |
| |
| ‘Audio’ and then | ||
MENU button. |
|
| press ENTER |
|
|
|
|
button.
MOVE | ENTER | EXIT | MOVE | ENTER | EXIT |
Press RETURN button to return to the previous level.
STOPEXIT
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press Cursor 
3 button to move to
‘DRC’ and then press ENTER
button.
4 Press Cursor
,
to adjust the ‘DRC’.
•When the Cursor 
button is pressed, the effect is greater, and when the
Cursor 
button is pressed, the effect is smaller.
SETUP
Press TEST TONE button. | L: Front Speaker (L) | C: Center Speaker | SW: Subwoofer | |
• Test tone will be produced as follows: | R: Front Speaker (R) | SL: Rear Speaker (L) | SR: Rear Speaker (R) | |
|
|
| ||
When playing a DVD or CD, this will work only in Stop mode. | ||||
• Use this function to check that each speaker is correctly con- | ||||
|
|
| ||
nected and that there is no problem. |
|
|
| |
To end the test tone, |
| Start |
| |
|
|
| ||
press TEST TONE button again.
MOVE | ENTER | RETURN | EXIT | CHANGE | RETURN | EXIT |
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47 | 48 |