Samsung HT-Q9R/ELS manual Listening to Radio, Remote Control Unit, Tune in to, Desired station

Listening to Radio

Remote Control Unit

Press the TUNER	2		Tune in to the
button and select
1the FM band.			desired station.
		Automatic Tuning 1		When	is pressed, a
				preset broadcast station is
				selected.
				Press and hold TUNING(
		Automatic Tuning 2				, )
				to automatically search for active
				broadcasting stations.
		Manual Tuning		Briefly press TUNING( ,		) to

increase or decrease the frequency incrementally.

Presetting Stations GB

Example: Presetting FM 89.1 in the memory

Press the TUNER	Press TUNING	3	Press the TUNER
button and select the	( , ) to select
1FM band.	2 "89.10".		MEMORY button.
	• Refer to Step 2 on page 61 to	• “PRGM” flashes in the display.
	automatically or manually tune in
	to a station.

Main Unit

1Press the FUNC- TION button to select the FM band.

2 Select a broadcast station.

Automatic Tuning 1	Press the STOP ( )
	button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( )

button to select "MANUAL"

and then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or

higher frequency.

	Press	5	Press the TUNER	To	preset another
4 to select preset			MEMORY button	6 station, repeat steps
number.			again.	2 to 5.

•You can select between 1 and 15 presels.

Note • This unit does not receive AM broadcasts. RADIO OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

• Each time the button is pressed, the sound switches between "STEREO" and "MONO".

55 • In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.

56