Before Using Your Home Theater
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.
To Operate the TV and DVD Player with a Single Remote Control
GB
1 | Plug the main unit's power |
cord into the AC power |
supply.
4 Press TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
Selecting the Video Format
2
5
Press TV button to set the remote to TV mode.
Press DVD RECEIVER button to switch to DVD RECEIVER mode.
3 Press the POWER button to turn on your Samsung TV with this remote.
Press FUNCTION button on
6 the main unit or DVD button
on the remote to enable DVD/CD playback.
OPERATION
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
• By default, the video format is set to "PAL".
• "NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
19 | • Each country has a different video format standard. | |
• For normal playback, the video format of the disc must be the same as the video | ||
format of your TV. | ||
|
Note
•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric
•By default, the remote control is set to work with Samsung TVs.
See page 57 for more information about remote control operation with other manufacturer's TVs.
20