Installing the DVD player | Connecting the Video Out to TV |
Choose one of the three methods for connecting to a TV.
GB
1
2
3
4
Separate the rear cover(A). | cover(A) |
|
Remove the 1 screw of the cover(B).
METHOD2
cover(B)
Put the speaker cable connected to the
Speaker OUT port into the left groove.
Put the cables connected to the Video OUT, Component OUT and Audio IN ports into the right groove.
METHOD 3
METHOD 1
(supplied)
TV
CONNECTIONS
5 |
| METHOD 1 | Composite Video ....... (Good Quality) | |
Fasten the 1 screw on the cover(B). | - Connect the supplied video cable from the VIDEO OUT jack on the side panel of the system | |||
| ||||
| to the VIDEO IN jack on your TV. | |||
|
| |||
|
| METHOD 2 | Component ....... (Better Quality) | |
|
| - If your television is equipped with Component Video inputs, connect a component video cable | ||
6 Close the rear cover(A). | (not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding | |||
jacks on your TV. | ||||
METHOD 3 | HDMI ....... (Best Quality) |
- Connect the HDMI out to the HDMI input on your TV.
Note • This product operates in Interlaced scan mode (576i) for component output.
13 | 14 |