3 – Installation (continued)
3-5 Installation Within Row (continued)
6After inserting the clevis pins, insert a cotter pin G through the hole at the end of each clevis pin. (The straight section of the cotter pin goes through the hole.)
G |
6 |
3-6 Ground Connection
1After installing the SRCABLELADDER accessory, determine where to place ground brackets by noting the distance between one end of the ladder and the grounding post A at the corner of the nearest SRCABLETRAY accessory.
1 | A |
|
2Place a ground bracket B near the end of the SRCABLELADDER accessory’s leg and use a
3Use the included hex nuts and lock washers G to connect one end of the included ground cable H to a grounding post I at the corner of the nearest SRCABLETRAY accessory and connect the other end to the grounding post J of the ground bracket attached to the
SRCABLELADDER accessory. Repeat steps 1 to 3 for the other end of the SRCABLELADDER accessory.
B |
|
| C |
2 |
|
G | J |
| |
G |
|
I |
|
H |
|
3 |
|
7