Samsung BD-C5300/EDC manual Network Status, Network Test, Use the number buttons to enter numbers

Page 39

10.When done, press the YELLOW(C) button on your remote, or move to the Done button, and then press the ENTER button.

The Network Connecting screen appears.

11.Wait until the connection confirmation message is displayed, and then press the ENTER button. The Network Settings screen reappears.

12.To test the connection, press the ▼ button to select Network Test, and then press the ENTER button.

Setting Up the Wireless Network Connection - Manual

If the Auto Setting does not work, you need to enter the Network settng values manually.

To get the Network setting values from most Windows computers, follow these steps:

1.Right click the Network icon on the bottom right of the screen.

2.In the pop-up menu, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support tab, click the Details button. The Network settings are displayed.

To Enter the Network settings into your product, follow these steps:

1.On the Internet Protocol Setup screen, press the ENTER button.

2.Press the ▲▼ buttons to select Manual, and then press the ENTER button.

3.Press the ▼ button to go to the first entry field (IP Address).

Settings

Display

 

Network Setting

 

 

Access Point Selection

: Not Selected

 

Audio

\

SystemInternet Protocol Setup

: Manual

 

 

Network

IP Address

:

0

0

0

0

Language Subnet Mask

:

255

255

255

0

Security

Gateway

:

0

0

0

0

GeneralDNS

: Manual

0

0

Support

DNS Server

:

0

0

 

 

a PBC (WPS) > Move

" Select

' Return

4.Use the number buttons to enter numbers.

5.When done with each field, use the ► button to move successively to the next field.

You can also use the other arrow buttons to move up, down, and back.

6.Enter the IP Address, Subnet Mask, and Gateway values.

7.Press the ▼ to go to DNS.

8.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.

9.When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button.

10.Go to Step 6 in the Automatic Wireless procedure above, and follow the directions from that point on.

Network Test

Use this menu to connect the wired network or check whether your network connection is working or not.

Network Status

Check whether a connection to the network and the Internet have been established.

05 Setup

English 39

Image 39
Contents Blu-ray Disc Player Key features Blu-ray Disc FeaturesBlu-ray Disc Player Features Important Note Safety InformationDisc Storage & Management Important Safety InstructionsPrecautions Disc HandlingRestrictions on Playback Maintenance of CabinetDisc Storage Handling CautionsContents Before Starting Initial Settings Connecting to an Audio SystemConnecting to the Network Wireless NetworkUsing the Popup Menu Using the Disc menu/Title menu/Popup menuUsing the Disc Menu Using the Title MenuTroubleshooting Using Internet@TVSettings Software Upgrade NotificationDisc Types and Contents that can be played Getting StartedDisc types that cannot be played BD-ROM Blu-ray Disc Compatibility Disc TypesAvchd format discs need to be finalized Audio CD CD-DAAvchd Advanced Video Codec High Definition Use a 700MB80 minutes CD-RW/-R discCopyright Region CodeLogos of Discs that can be played AccessoriesCheck for the supplied accessories below Audio/Video cable Quick Guide Remote ControlFront Panel Front Panel Display LAN Rear PanelTour of the Remote Control Remote ControlInstalling batteries TV CH Setting the Remote ControlControllable Tv Codes Connected to the TVConnections Connecting to a TVRed White Audio cableCase 3 Connecting to a TV Component Better Quality Resolution is actually 576i/480iRed White Red Blue Green Red White Yellow Case 4 Connecting to a TV Video Good QualityHdmi cable not included Connecting to an Audio SystemCase 2 Optical cable Not included Connecting to the Network ServiceCable Network Broadband service Wireless NetworkYou can connect to network with a Wireless IP sharer Wireless IP sharerDo not confuse because this is not malfunction SetupBefore Starting Initial Settings Press the Enter button to select Start buttonExit Button Press this to exit the menu Setting the MenuAccess step may differ depending on the selected menu Move the cursor or select an itemDisplay ResolutionTV Aspect BD Wise Samsung Products onlyResolution according to the output mode Movie Frame 24Fs Progressive ModeStill Mode Hdmi FormatBitstream Set whether to downsample 96kHz signalsPCM Downsampling Digital Output SelectionDTS Neo6 Downmixing ModeInitial Settings Dynamic Range ControlDivXR Registration Clock Mode You can set it to Auto or ManualBD Data Management ClockNetwork Network SettingsWired Network DivXR DeactivationWireless Network Use the number buttons on your remote to enter numbersPress the Return button on your remote  Setting Up the Network Connection Press the Enter buttonPress the buttons to select Auto or Network Status Network TestUse the number buttons to enter numbers Language Change PasswordBD-LIVE Internet Connection Parental RatingEnergy Saving Power On/Off SoundSoftware Upgrade BackgroundProvide contact information for assistance with your product Contact SamsungBasic Functions Slow Motion Play Using the Popup MenuSkipping Chapters Searching for a Desired SceneMoving to a Desired Scene Directly Using the Tools buttonRepeat the Title or Chapter Repeat the SectionChanging the Camera Angle Selecting the Picture SettingSelecting the Audio Language Selecting the Subtitle LanguageSetting Bonusview Buttons on the Remote Control used for Music PlaybackListening to Music Audio CD CD-DA/MP3 Screen Elements Playing an Audio CD CD-DA/MP3Repeat an Audio CD CD-DA/MP3 PlaylistPlaying back a Picture Using the Tools buttonRepeat this procedure to select additional tracks Playing a Jpeg DiscPlaying back a USB Storage Device Sampling rates in kHz 8, 11, 16, 22, 32, 44.1 Supported file formats1920x1080 Compliant with WMA versionInternet@TV at a Glance Press the Enter button Map and address appear on the screen Using the KeypadSystem Setup Network ServicesSettings Account LoginService Manager Samsung AppsProperties Is connected with your product or not Check the size of the remaining memory Update processServices Message can be displayedAppendix TroubleshootingBD-LIVE service Forgot passwordAuthorized service centre Hdcp High-bandwidth Digital Content ProtectionIndex +5C to +35C SpecificationsWeight Dimensions X 207 D X 43 H mmCopy Protection Compliance and Compatibility NoticeNetwork Service Disclaimer License Tel 0818 717 Fax +44 0131 202 United Kingdom Eire` Africa AreaWeb Site ` EuropeAK68-01941P-00 Correct disposal of batteries in this product
Related manuals
Manual 261 pages 45.33 Kb Manual 257 pages 54.26 Kb Manual 130 pages 57.96 Kb Manual 260 pages 52.54 Kb Manual 261 pages 55.08 Kb