Basic Functions
Selecting the Audio Language
hzZx
You can also operate this function by pressing the AUDIO button on the remote control.
1.During playback, press the TOOLS button.
2.Press the ▲▼ buttons to select Audio.
3.Press the ◄► buttons to select the desired audio language.
✎NOTE
▪The ◄► indicator will not be displayed on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.
▪Information about the main feature/BONUSVIEW mode will also be displayed if the
Use the ◄► button to switch between main feature and BONUSVIEW audio modes.
▪This function depends on what audio languages are encoded on the disc and may not be available.
▪A
▪Some
▪If you press the AUDIO button on the remote control, Audio bar will be displayed.
Press the RETURN button to remove the Audio bar.
Selecting the Subtitle Language
hZx
You can also operate this function by pressing the SUBTITLE button on the remote control.
1.During playback, press the TOOLS button.
2.Press the ▲▼ buttons to select Subtitle.
3.Press the ◄► buttons to select the desired subtitle language.
✎NOTE
▪Depending on the
▪This function depends on what subtitles are encoded on the disc and may not be available on all
▪A
▪Information about the main feature/BONUSVIEW mode will also be displayed if the
▪This function changes both the primary and secondary subtitles at the same time.
▪The total number of subtitles is the sum of the primary and secondary ones.
▪If you press the SUBTITLE button on the remote control, the subtitle bar will be displayed.
Press the RETURN button to remove the subtitle bar.
Changing the Camera Angle
hZ
When a
1.During playback, press the TOOLS button.
2.Press the ▲▼ buttons to select Angle.
3.Press the ◄► buttons to select the desired Angle.
Selecting the Picture Setting
hzZy
This function enables you to adjust video quality when you are connected to a TV via HDMI.
1.During playback, press the TOOLS button.
2.Press the ▲▼ buttons to select Picture Setting, then press the ENTER button.
3.Press the ◄► buttons to select the desired Picture Setting, then press the ENTER button.
46 English