Samsung BD-F7500/XE, BD-F7500/EN manual HDMI1, HDMI2

Audio	DTS Neo:6 Mode	You can enjoy multichannel sound via HDMI output from
		a 2 channel audio source.
		In some cases when the product is connected to a
		digital TV, the audio signal may not synchronize with the
		video signal. If this occurs, adjust the audio delay time
		to match the video signal.
	Audio Sync	• You can set the audio delay time between 0 msec
		and 200 msec.
		Adjust it to the optimal setting.
		NOTEs
		\\ The audio delay time you specify may not be exact depending
		on the played content.
		Set HDMI audio to output through HDMI1 or HDMI2.
		 Auto : Audio output will be set automatically based
	HDMI Audio Output	on the devices connected to HDMI1 and HDMI2.
		 HDMI1 : Audio will output to the device connected to
		HDMI1.
		 HDMI2 : Audio will output to the device connected to
		HDMI2.
		Lets you select the kind, size, and number of speakers
		you have attached to your player, adjust the following
		speaker settings for the speakers attached, and turn the
		test tone on and off so you can test the speakers.
		 Size : Lets you select the size of each kind of
		attached speaker - Large or Small - or indicate that
		you don't have a particular kind of speaker attached
		by selecting None. If you select None for a kind of
	Speaker Settings	speaker, that kind of speaker will be grayed out on
		the Level and Distance screens.
		 Level : Lets you adjust the relative loudness of each
		speaker from 0 dB to -6 dB.
		 Distance : Lets you adjust the relative distance of
		each speaker from the listening position up to 30 feet.
		The farther the distance, the louder the speaker will
		be.
		 Test Tone : Lets you run the Test Tone function so
		you can test your adjustments. Setting Test Tone to
		On turns the Test Tone on. Setting it to Off turns it off.

04 Settings

English 25