Samsung BD-E5500/EN, BD-E5500/XE Networks and the Internet, Configuring Your Network Connection

Settings

Networks and the Internet

When you connect this player to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the player's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 25~26. Instructions for configuring the network connection start below.

Configuring Your Network

Connection

Before you begin, contact your ISP to find out

1.

In the Home menu, select Settings, and

ĞĞ Wired - Manual

2.

then press the v button.

If you have a static IP address or the

Select Network, and then press the v

Automatic procedure does not work, you'll

3.

button.

need to set the Network Settings values

Select Network Settings, and then

manually.

press the v button.

The Network Settings screen appears.

Settings

Network Settings

Display

MAC Address

XX:XX:XX:XX:XX:XX

Settings

Audio

IP Address

0.0.0.0

Network

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

Display

Network Settings

System

DNS Server

0.0.0.0

Audio

Select a network connection type.

LanguageIP auto setting failed. Try the following to set up the IP automatically:

Network

Wired

- Ensure that the DHCP server is enabled on the router, then restart router.

Security- Contact your Internet service provider for more information.

System

Wireless

Alternatively, set up the IP manually by selecting IP Settings.

General

Language

(general)

Connect to the network using a LAN cable. Please make

Support

IP Settings

Retry

OK

Security

WPS(PBC)

sure that the LAN cable is connected.

a Previous

<Move

"Enter '

Return

General

Support

>Move "Enter 'Return

5.When done, highlight OK, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

< Getting the IP Settings values >

You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps:

•Windows XP

1.	Right click the Network icon on the
2.	bottom right of the Windows desktop.
	In the pop-up menu, click Status.
3.	On the dialog that appears, click the

if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.

If you are connecting to a wireless network, disconnect any wired network connection before you begin.

To begin configuring your network connection, follow these steps:

Wired Network

ĞĞWired - Automatic

To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 18.

1.Select Wired in the Network Settings screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

1.Select Wired in the Network Settings screen, and then press the v button. The Network Status screen appears. The player attempts to verify the network connection and fails.

2.Select IP Settings on the bottom of the screen, and press the v button.

The IP Settings screen appears.

3.Select the IP Mode field, and then set it to Manual.

4.Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

Support tab.

4. On the Support tab, click the Details

button.

The Network settings are displayed.

•Windows 7

1.Click the Network icon on the bottom right of the Windows desktop.

2.In the pop-up menu, click Network and Sharing Centre.

3.On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection.

4.On the Support tab, click the Details button.

The Network settings are displayed.

18 English