Samsung P001/XEH manual Service, Is it a technical fault?

Page 25

Warranty and Service (Continued)

What does it mean when the burner does not glow red?

EN

The selected temperature of the cooking zone is maintained by a sensor that cycles the zone on and off, so the surface cooking area will not always glow red. If you select a low heat setting, the heat will cycle on and off more frequently than at higher settings. The heat also cycles on and off at the highest setting.

If you request a service call because of an error made in operating the appliance, the visit from the customer service technician may incur a charge even during the warranty period.

Service

Before calling for assistance or service, please check the section “Troubleshooting.” If you still need help, follow the instructions below.

Is it a technical fault?

If so, please contact your customer service centre.

Always prepare in advance for the discussion. This will ease the process of diagnosing the problem and also make it easier to decide if a customer service visit is necessary.

Please take note of the following information.

What form does the problem take?

Under what circumstances does the problem occur?

When calling, please know the model and serial number of your appliance. This information is provided on the rating plate as follows:

Model description

S / N code (10 digits)

We recommend that you record the information here for easy reference.

Model:

Serial number:

When do you incur costs even during the warranty period?

if you could have remedied the problem yourself by applying one of the solutions provided in the section “Troubleshooting,”

if the customer service technician has to make several service calls because he was not provided with all of the relevant information before his visit and as a result, for example, has to make additional trips for parts. Preparing for your phone call as described above will save you the cost of these trips.

23

Image 25
Contents Ceramic Glass Hob Page Contents Following symbols are used in the text Using This ManualElectrical safety SafetyChild safety Safety when cleaning EN Safety during useDisposal Instructions Disposing of the packaging materialSafety instructions for the installer Installing the HobRegulations and compliance EN Connecting to the mains power supply Installing into the countertop 100 Cooking zones and control panel Parts and FeaturesEN Components Key features of your appliance Residual heat indicator EN Safety shutoffOther reasons why a cooking zone will switch itself off Using suitable cookware Initial cleaningBefore You Begin Hob UseUsing the touch control sensors Temperature control Switching the appliance onSwitching a cooking zone off EN Switching the appliance offSwitching the child safety lock on Using the child safety lockSwitching the child safety lock off Locking and unlocking the control panel Suggested settings for cooking specific foodsLight Soiling Cleaning and CareStubborn Soiling To avoid damaging your appliance Problem DirtEN FAQs and troubleshooting Warranty and ServiceIs it a technical fault? ServiceWhen do you incur costs even during the warranty period? Cooking rings Technical DataPage Questions or Comments
Related manuals
Manual 12 pages 11.85 Kb Manual 12 pages 47.86 Kb Manual 28 pages 46.65 Kb Manual 28 pages 4.04 Kb Manual 12 pages 35.99 Kb