troubleshooting
PROBLEM | SOLUTION | ||
|
|
| |
Motor does not start. | • | Check cable, pulg and socket. | |
• | Leave to cool. | ||
| |||
|
|
| |
Suction force is gradually | • | Check for blockage and remove. | |
decreasing. |
|
| |
|
|
| |
Cord does not rewind | • | Pull the cord out | |
fully. | |||
|
| ||
|
|
| |
Vacuum cleaner does not | • | Check hose and replace if required. | |
pick up dirt. |
|
| |
|
|
| |
Low or decreasing | • | Please check filter and, if required, clean as illustrated in the | |
suction. |
| instructions. if filters are out of condition change them to new ones. | |
|
|
| |
Body overheating. | • | Please check filters, if required clean as illustrated in the instruction. | |
|
|
| |
Static electicity | • | Please decrease power suction. | |
• | This can also occur when air in the room is very dry. | ||
discharge. | |||
| Please ventilate the room to air humidity become a normal. | ||
|
| ||
|
|
|
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
04troubleshooting