PARK POSITION
Located on the top rear side of the
TRANSPORTING AND STORING THE VACUUM CLEANER
For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position.
REPLACING THE DUST BAG
1) To open the dust cover of the dust bag | 2) Remove the dust bag from the cleaner. |
compartment, press the clamper upwards.(The |
|
clamper is located at the front of the dust cover) |
|
3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position.
4)Press the dust cover down gently until the clamper relocks.
FOR CLOTH FILTER BAG
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
▲
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may result. After cleaning the secondary filter attach it in place.
SECONDARY FILTER SECONDARY FILTER