Introduction, Installation | Dakota Digital CMD-4000 instruction

CMD-4000 SERIES REV. A

4+ FUNCTION REMOTE CONTROL DOOR LATCH OPENER SYSTEM

INTRODUCTION

Thank you for purchasing the CMD-4000 series Remote Control Door Latch Opener System from Dakota Digital, Inc. This, along with many other products that Dakota Digital, Inc. has to offer, represents the latest in electronics technology for the street rod, classic car and truck, and any custom vehicle.

The CMD-4000 Remote Control Door Latch Opener system comes complete with receiver, two key chain transmitters, wiring harness, and emergency release switch. The CMD-4001 includes the CMD-4000 along with two PDR-1 door release actuators. The CMD-4002 includes the CMD-4000 along with three PDR-1 door release actuators. It is installed to remotely release the driver's and passenger's doors independently along with additional channels to release a trunk latch, rear door latch, operate a motor, or whatever. A safety feature disables the system when the ignition is on to avoid accidental door opening during vehicle operation. An emergency release switch can be concealed on the underside of the vehicle should the door ever be closed with the motor running and you on the outside. Pressing this button will allow reentry to the vehicle even though the remote control system is disabled.

INSTALLATION

While installation of the CMD-4000 is very straightforward, paying a little attention here and planning out how the system will fit into your specific vehicle will save some time in the long run. First, determine the best mounting method for the door motors within the doors. The pull (or push) on the original door latch or newer bear claw latch should be as straight as possible. Securely mount the motor and route a connecting rod as pertains to your specific situation.

The receiver should be mounted under the dash up on the fire wall for best access to wiring. The kick panel is also another good location for the receiver.

Connect the CMD-4000 system as is shown in the wiring diagram. While the wiring diagram is self explanatory, there are several key areas to pay particular attention to. First, the 12 volt source should be able to supply up to 10 amps if standard door actuators are used or 30 amps if high power solenoids are used. It should not be connected to a feed that is shared with a high current device such as a power window, power seat, or fan. Connecting to a source shared by a device such as this may cause improper operation due to the surge current and subsequent voltage drop caused by the high current devices. The CMD-4000 should only be connected to a 12 volt battery for power and never solely to a battery charger.

ADDITIONAL TRANSMITTERS

The transmitters supplied with your remote system are serial number coded for security. Each unit can “learn” up to 4 transmitters. It is also possible to program one transmitter into more than one receiver. If you have more than one vehicle with the CMD-4000 system you can program all of the transmitters into both units. Transmitters from other manufacturers, such as car alarm systems, will not work with the CMD-4000.

CMD-4000 specifications

The Dakota Digital CMD-4000 is an innovative gauge system designed for automotive enthusiasts seeking advanced monitoring and customization for their vehicles. This cutting-edge digital display offers a comprehensive suite of features, technologies, and characteristics that enhance both functionality and aesthetics.

One of the standout features of the CMD-4000 is its versatility in compatibility. It can interface with various vehicle types, making it suitable for classic cars, modern builds, or custom applications. This adaptability allows enthusiasts to benefit from modern technology regardless of the age of the vehicle they are working on.

At the heart of the CMD-4000 are its high-resolution digital displays. The system utilizes vibrant LED technology, providing clear visibility in various lighting conditions, whether it’s day or night. The gauges not only provide precision readings for speed, RPM, fuel level, and temperature but do so with a sleek, modern design that enhances the vehicle's interior.

Another significant characteristic of the CMD-4000 is its advanced monitoring capabilities. The system can track important engine parameters, including oil pressure, coolant temperature, and transmission fluid temperature. This real-time data acquisition allows drivers to stay informed about their vehicle's performance and make informed decisions during operation.

Customization is a key aspect of the CMD-4000. Users can choose from a variety of gauge styles, colors, and layouts to match their preferences or vehicle aesthetics. Dakota Digital provides integrated software that allows for easy setup and customization, enabling users to personalize the display to suit their driving habits and style.

Additionally, the CMD-4000 incorporates advanced technologies such as Bluetooth connectivity. This allows for the integration of mobile devices, enabling users to monitor data through a smartphone app. This functionality provides convenience and accessibility, allowing users to keep an eye on their vehicle's performance from anywhere.

Installation of the CMD-4000 is designed to be user-friendly, with comprehensive instructions provided. The system is engineered for reliability and durability, ensuring that the investment will last for years of driving enjoyment. With its combination of modern technology, customization options, and user-friendly installation, the Dakota Digital CMD-4000 stands out as a premier choice for car enthusiasts aiming to upgrade their vehicle's instrumentation.