Trouble Shooting Guide

TROUBLE SHOOTING GUIDE
Symptom	Possible Problem	Solution

----------------------------------------------------------------------------------------------------------------------------------------------------

System will not operate doors	Receiver is not getting	Check 12 volt connection.
or trunk (LED does not flash).	power.	Check ground connection.
		Check fuses.
Doors and trunk will not work.	Ignition key is on.	Turn off ignition key.
(LED flashes when button is pressed)	Yellow wire has 12 volts at all times.	Move yellow wire to a terminal
		that is powered only when the
		key is on.
Door latch actuators ‘jump’	Weak or poor 12 volt connection.	Check 12 volt connection.
or ‘chatter’.		Move to new terminal point.
	Antenna is too close to the power	Reposition antenna or wiring
	wires.	harness.
Transmitter has very short range	Transmitter battery is weak.	See Battery Replacement.
on all functions.	Antenna needs repositioning	Move antenna out away from
		any high current wires.
Emergency Entry button will	Switch not hooked up correctly.	Check power connection.
not work.		Check wiring connection.

If none of these solutions solve the problem, or the problem occurring is not listed here, please call the Dakota Digital technical assistance line at (605) 332-6513 for further assistance or email to dakotasupport@dakotadigital.com.

CMD-4000 REMOTE CONTROL DOOR OPENER SYSTEM

LIMITED LIFETIME WARRANTY

DAKOTA DIGITAL, INC. (the Company) warrants to the ORIGINAL PURCHASER of this remote control product that should any included control relay(s), electronic module, or transmitters under normal use and condition, be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts or labor directly related to repairs of the defect(s).

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the factory. This Warranty is valid for the original purchaser only and may not be transferred.

This Warranty does not cover batteries, nor extend to damage to vehicle electrical system. This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,

SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

The Company does not warrant that this product cannot be compromised or circumvented. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation if incidental or consequential damage so the above limitations or exclusion may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

4510 W. 61ST St. N., Sioux Falls, SD 57107

Phone: (605) 332-6513 FAX: (605) 339-4106

www.dakotadigital.com

dakotasupport@dakotadigital.com

CMD-4000 specifications

The Dakota Digital CMD-4000 is an innovative gauge system designed for automotive enthusiasts seeking advanced monitoring and customization for their vehicles. This cutting-edge digital display offers a comprehensive suite of features, technologies, and characteristics that enhance both functionality and aesthetics.

One of the standout features of the CMD-4000 is its versatility in compatibility. It can interface with various vehicle types, making it suitable for classic cars, modern builds, or custom applications. This adaptability allows enthusiasts to benefit from modern technology regardless of the age of the vehicle they are working on.

At the heart of the CMD-4000 are its high-resolution digital displays. The system utilizes vibrant LED technology, providing clear visibility in various lighting conditions, whether it’s day or night. The gauges not only provide precision readings for speed, RPM, fuel level, and temperature but do so with a sleek, modern design that enhances the vehicle's interior.

Another significant characteristic of the CMD-4000 is its advanced monitoring capabilities. The system can track important engine parameters, including oil pressure, coolant temperature, and transmission fluid temperature. This real-time data acquisition allows drivers to stay informed about their vehicle's performance and make informed decisions during operation.

Customization is a key aspect of the CMD-4000. Users can choose from a variety of gauge styles, colors, and layouts to match their preferences or vehicle aesthetics. Dakota Digital provides integrated software that allows for easy setup and customization, enabling users to personalize the display to suit their driving habits and style.

Additionally, the CMD-4000 incorporates advanced technologies such as Bluetooth connectivity. This allows for the integration of mobile devices, enabling users to monitor data through a smartphone app. This functionality provides convenience and accessibility, allowing users to keep an eye on their vehicle's performance from anywhere.

Installation of the CMD-4000 is designed to be user-friendly, with comprehensive instructions provided. The system is engineered for reliability and durability, ensuring that the investment will last for years of driving enjoyment. With its combination of modern technology, customization options, and user-friendly installation, the Dakota Digital CMD-4000 stands out as a premier choice for car enthusiasts aiming to upgrade their vehicle's instrumentation.

CMD-4000 specifications