Crimestopper Security Products SP-200 Option Programming, = Default Setting

OPTION PROGRAMMING

1.Turn the Ignition ON and press the Override/Program button 5 times.

2.After a short delay, the parking lights will flash 5 times, Siren 5 times, Horn 5 times and status LED will be on solid.

3.Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to the options chart below. Siren and/or optional horn should chirp for each press.

4.When you get to the desired option number, quickly press the appropriate button on the remote control according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2 chirps/flashes for button 2, 3 for Button #3 and 4 for button #4. (See Chart below for option descriptions and values.)

5.Turn Ignition off. System chirps and flashes the lights 3 times on exit. When you are finished customizing options, check operation.

	PROGRAMMING OPTIONS CHART			* = Default Setting
Option	Option Description	BUTTON 1		BUTTON 2	BUTTON 3	BUTTON 4
#		LOCK		UNLOCK	AUX	SILENT
1.	Factory Horn Chirps / Pulses	Pulse with trip	Arm/Disarm Chirps		*Arm/Disarm/Warn
		only		& Pulse with trip	Chirp & Pulse w/ trip *
2.	Passive Arming ON & OFF	Ignition &		*OFF*	Ignition & Last Door w/	Last Door
	Passive Chirp Countdown	Last Door			Chirp Countdown	Only
3.	Passive Lock / Cust. Override	ON		*OFF*	Custom Override
4.	Ignition controlled Locks	*ON*		OFF	Ignition Lock Only
5.	5/60 Sec. Door Open Warning	5 Seconds		*60 Seconds*
6.	Active Re-Arm (30 Sec.)	*ON*		OFF
7.	Double Unlock Pulse	*OFF*		ON
8.	Silent Arm/Disarm	*OFF*		ON
	(Chirp Defeat w/button 1 or 2)
9.	Parking Lights on with disarm	*ON*		OFF
10.	Disarm with trunk pop	OFF		*ON*
11.	N/A	N/A		N/A
12.	Door Lock Pulse Time	*0.7 Sec.*		3 Sec.
13.	Type of Carjack Protection	*ACTIVE*		PASSIVE	FULL-TIME
14.	Carjack Enable/Disable	*Disable*		Enable
15.	L/UL or Arm/Disarm w/IGN ON	*Lock/Unlock *		Arm/Disarm
16.	Data Port Protocol	*2-Way*		1-Way
	1-Way = OFA, 2-Way = SL

10