Crimestopper Security Products CS-2004DC II Shock / Impact Protection with PRE-WARNING

Page 20

OPERATION

SHOCK / IMPACT PROTECTION WITH PRE-WARNING

Once the system is armed, if a low-level shock to the vehicle body is detected, the pre-warning sensor activates with 5 siren chirps and one light flash as a Warn-Away feature. If a hard impact to the vehicle is detected the system will go into a full trigger cycle for 20 seconds. Adjust the shock sensor as needed by turning the control knob clockwise or counter-clockwise to increase or decrease the sensitivity. Shock sensors will “settle in” over time and it may take a few tries over a few weeks to get the adjustment correct for your vehicle. We recommend a moderate adjustment where the vehicle is protected but it is not constantly triggering from the slightest vibration creating a nuisance.

ARMING WITHOUT SHOCK SENSOR

To arm the alarm without Shock sensor protection, press Button #1 as normal then press and hold Button #4 (SLNT) for about 3 seconds until the unit flashes the lights 3 times indicating shock sensor bypass.

EMERGENCY OVERRIDE/DISARM

If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to open the door with the key, (activating the alarm), turn the ignition ON, press and hold the override/program until the system disarms (about 7 seconds). The Alarm will disarm allowing you to operate the vehicle until you can repair/replace the remote transmitter.

VALET MODE (VIA KEY or REMOTE)

Turn the ignition on and press and hold the program button for 5 seconds the remote until lights chirps 3 times. The in-dash LED turns on solid. Repeat the procedure to exit VALET mode. To activate Valet using the remote control, press both the #1 (Lock) & #2 (Unlock) buttons together for 3 seconds when the system is disarmed. The system will chirp 3 times and the LED will turn off on Valet mode exit. Lock/Unlock and AUX features will still operate in when in VALET mode. Use your remote to enter or exit valet mode even if you do not have a valet button.

VALET PARK Mode (Using the remote transmitter only)

Note: Valet Park mode is only accessible when using the remote transmitter. Valet park mode allows you to turn over the vehicle to a valet allowing access to drive/lock/unlock your vehicle, but alarm will trigger if the trunk is opened. To activate Valet Park, press and hold both buttons #1 (Lock) & #2 (unlock) together for about 6 seconds. 3 chirps will be heard first when unit goes into regular Valet and as you continue to hold both buttons you will hear 2 more chirps. LED will flash slowly when in Valet Park. Repeat this step to exit Valet Park mode.

PRIOR INTRUSION ALERT

If the system was tripped in your absence, the dash LED will be flashing rapidly. When the system is disarmed you will hear 2 chirps, a pause then 4 chirps. Carefully inspect your vehicle for any damage or theft.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CS-2004TW1 CS-2004DC Tech Support 800Table of Contents Installation Cautions & WarningsWiring Black Wire Chassis GroundOrange Wire Negative Armed Output White Wire +12V Flashing Parking Light Output 10ABlue Wire HOOD/TRUNK Trigger Green Wire Door TriggerViolet Wire + Door Trigger Pink Wire + Carjack InputAuxiliary 15A On-Board relay wiring BROWN/WHITE Horn Honk Output Optional, May require a relayPIN Brown AUXILIARY/DOME Output Plug ORANGE/BLACK Wire Dome Light Illumination Output OptionalPIN Blue Sensor #2 Plug WHITE/RED Wire Remote Output #2 Optional GrayPower Door Lock Wiring Power Door Lock Diagrams Negative Trigger Doorlock WiringStarter Disable Wiring Starter Disable Plug 3 Orange 14 GA. WiresSystem Wiring Diagram CS-2004TW1 CS-2004DCCS-2004TW1 Antenna CS-2004TW1 Antenna SystemOption Programming To Engage Option ProgrammingAutolock with Ignition Passive ArmingActive RE-ARM Passive LocksProgram Option Reset ENABLE/DISABLE Carjack FeaturesDoor LOCK/UNLOCK Pulse Time Double Unlock PulseCS-2004TW1 / CS-2004DC II Remote Programming Transmitter Programming Notes Read firstPress 4Xs TW1DCFlash 2, 3, or 4 Xs Press TogetherCS-2004DC II / CS-2004TW1 remote controls OperationAlarm Triggering Alarm Cycle ResetActive Arming DisarmingShock / Impact Protection with PRE-WARNING Arming Without Shock SensorEmergency OVERRIDE/DISARM Prior Intrusion AlertPassive Arming / Passive Lock Modes Progammable Dome Light Illumination OptionalDoor Open Warning AUTOLOCK/UNLOCKCS-2004TW1 LED Transceiver LOW Battery Warning Vehicle Operation CS-2004DC II System only Carjack ProtectionVehicle 2 Button Programmable Active CarjackSWITCH-CONTROLLED Carjack Protection Pink Wire Configuration Programmable Passive Carjack

CS-2004DC II specifications

Crimestopper Security Products CS-2004DC II is an advanced vehicle security system designed for those who prioritize safety and peace of mind. This comprehensive security solution is equipped with a range of features that not only protect your vehicle from theft but also enhance its overall functionality.

One of the standout qualities of the CS-2004DC II is its dual-stage shock sensor. This technology helps detect any unauthorized entry or attempted break-in by distinguishing between normal vibrations and more serious impacts. As a result, the system provides two different responses: a warning chirp for minor disturbances and a full alarm for significant threats. This smart sensor minimizes false alarms while offering robust protection for your vehicle.

The CS-2004DC II also includes a two-way pager remote that allows the user to receive real-time alerts about the status of their vehicle. With a range of up to 1,500 feet, this feature ensures that you are always aware of any disturbances, whether you're nearby or at a distance. The remote is user-friendly and includes buttons for various functions such as locking and unlocking doors, activating the panic mode, and operating the vehicle's trunk.

Another key feature of the CS-2004DC II is its built-in keyless entry system, which enables easy access to your vehicle without the need for traditional keys. This not only adds convenience but also enhances security by reducing the risk of keys being stolen or lost.

The system also supports remote start functionality, allowing you to precondition your vehicle in hot or cold weather. This feature not only provides comfort but can also improve engine efficiency as warmed-up engines require less fuel to operate. The inclusion of a starter interrupt relay adds an extra layer of security, preventing unauthorized individuals from starting the engine.

Security is further augmented with additional options such as trunk release and auxiliary outputs for adding further devices like GPS tracking systems. The system is designed to be easily installed in a variety of vehicles, and its durable construction ensures long-lasting performance.

In summary, Crimestopper Security Products CS-2004DC II stands out in the realm of vehicle security systems due to its impressive array of features, including dual-stage shock sensors, two-way pager remote, keyless entry, remote start, and additional customizable options. These technologies not only offer peace of mind but also enhance the convenience and functionality of your vehicle, making it a valuable investment for any car owner.
Top Page Image Contents