Crimestopper Security Products CS-2002DC SERIES III manual Power Door Lock Wiring

Page 6

WIRING

RED WIRE: +12V POWER INPUT (15 amp fuse)

Connect to +12 Volt source with supplied fuse & holder. Recommended location for this connection is at the vehicle battery positive terminal.

14 GA. BROWN WIRE: (On-board Starter Disable Relay)

Cut the 14GA. Brown wire in half. Connect the 2 female terminals to the Male terminals on the CS-2002DC III control module. Cut the starter (Cranking only) wire on the vehicle. Connect the two brown wires to the 2 ends of the Starter wires. See SYSTEM WIRING DIAGRAM on PAGE 20

2 PIN PLUG (BLUE): PROGRAM/OVERRIDE PUSH BUTTON

Mount the Valet/Programming switch in a concealed but accessible location. This button is required when programming options and when an emergency override is required.

2 PIN PLUG (RED): LED INDICATOR (RED FLASHING LIGHT) Mount the LED in a visible location of the dash or console.

4 PIN SENSOR PLUG/HARNESS (WHITE):

White Wire: Negative Warn-away

Blue Wire: Negative Trigger

Black Wire: Sensor Ground Red Wire Sensor Power

SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist you in adjusting sensitivity. The Green LED indicates the “Warn Away” level and the Red LED indicates a full alarm shock sensor violation. The green screw adjusts “Warn Away” threshold and red screw adjusts the “Trigger” threshold.

POWER DOOR LOCK WIRING

3 PIN DOOR LOCK PLUG (Optional):

GREEN: (-) Negative pulse for LOCK

RED: +12V Coil Power for using relays.

BLUE: (-) Negative pulse for UNLOCK

Hint: Determine the type of locking system the vehicle has before connecting any wires. Incorrect connection could result in damage to the alarm and/or the vehicle’s locking system.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CS-2002DC Series Mon-Fri 800 AM-430 PM Pacific Time 800Table of Contents Installation Cautions & WarningsViolet Wire + Door Trigger WiringGreen Wire Door Trigger Control Module & Component MountingGray Wire AUX Remote Output 1 Optional, may require a relay Black Wire System Chassis GroundYellow Wire Ignition Switched on and Start +12 Volts Blue Wire HOOD/TRUNK Trigger OptionalCS-2002DC III Module Power Door Lock Wiring PIN Plug Blue PROGRAM/OVERRIDE Push ButtonPIN Sensor PLUG/HARNESS White Reverse Polarity Door Lock Wiring Separate DRIVER’S Door Unlock Wiring Negative Trigger Door LocksDiagram Transmitter Programming= Default Setting Option ProgrammingIGNITION-CONTROLLED Locks Horn Chirps / PulsesPassive Arming / Chirp Countdown 10 or 60 Sec. Door WarningSilent Arming /DISARMING Chirp Defeat Carjack FeaturesDouble Unlock Pulse Parking Lights on with DisarmProgrammable Option Reset Custom Personal Override CodeAlarm Triggering Active ArmingDisarming Operating Instructions Prior Intrusion Alert Valet ModeEmergency Disarm with Custom Override Dome Light Illumination OptionalActive RE-ARMING FAIL-SAFE Protection Vehicle OperationIGNITION-CONTROLLED Doorlocks ARM/DISARM with Ignition on Program Option #15Passive Carjack Carjack Protection FeaturesActive Carjack FULL-TIME CarjackLED / Valet POD & Shock Sensori LED / Valet Button PODRED

CS-2002DC SERIES III specifications

Crimestopper Security Products has consistently delivered high-quality security solutions, and the CS-2002DC SERIES III is no exception. This advanced vehicle security system is specifically designed to provide robust protection against theft and unauthorized access, ensuring peace of mind for vehicle owners.

One of the standout features of the CS-2002DC SERIES III is its dual-zone impact sensor. This sophisticated technology allows the system to detect and respond to different levels of force applied to the vehicle. For instance, light impacts can trigger a warning while more intense impacts will activate the full alarm system, giving users control over their security responses. This feature not only enhances security but also reduces false alarms, ensuring that the system only responds to genuine threats.

The CS-2002DC SERIES III also incorporates a convenient keyless entry system. With a simple press of a button, users can lock or unlock their vehicle from a distance, making it an ideal feature for those who value convenience and modern technology. The system comes with a remote transmitter, which can be easily programmed for personalized use, ensuring a unique operating code for each user.

Additionally, the system boasts a comprehensive alarm feature that activates in the event of a break-in or an unauthorized attempt to access the vehicle. The alarm is accompanied by flashing lights and a loud siren, which serves to deter potential intruders and alert those nearby of the situation.

One of the noteworthy characteristics of the CS-2002DC SERIES III is its compatibility with a variety of vehicles. Whether you own a car, truck, or SUV, this security system can be easily installed and integrated into your existing setup. The flexibility and adaptability of the system make it an appealing choice for a wide range of vehicle owners.

Furthermore, the system includes a starter interrupt feature, which prevents the vehicle's engine from starting unless the correct sequence is entered via the remote. This adds an extra layer of security, as potential thieves are unable to operate the vehicle even if they gain access to it.

In conclusion, the Crimestopper Security Products CS-2002DC SERIES III is a sophisticated vehicle security system that combines advanced technology with user-friendly features. With its dual-zone impact sensor, keyless entry, comprehensive alarm capabilities, and starter interrupt feature, it stands as an excellent choice for anyone looking to enhance their vehicle's security and protect their investment against theft and unauthorized access.
Top Page Image Contents