Setting Up the Language Features

Setting Up the Language Features		Setting Up the Language Features		Setting Up the Audio Options

Using the Disc Menu Language

This function changes the text language only on the disc menu screens.

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Select Disc Menu using UP/DOWN buttons, then press the RIGHT or ENTER button.

5.Use the UP/DOWN buttons to select the desired language.

- Select “Others” if the language you want is not listed.

Using the Audio Language

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Select Audio using UP/DOWN buttons, then press the RIGHT or ENTER button.

5.Use the UP/DOWN buttons to select the desired language.

-Select “Original” if you want the default soundtrack language to be the original language the disc is recorded in.

-Select “Others” if the language you want is not listed.

AUDIO LANGUAGE

Using the Subtitle Language

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Select Subtitle using UP/DOWN buttons, then press the RIGHT or ENTER button.

5.Use the UP/DOWN buttons to select the desired language.

-Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio preference.

-Select “Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting.

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

		AUDIO SETUP

	Dolby/DTS Digital Out	: PCM

Audio

SUBTITLE LANGUAGE

Automatic

MPEG-2 Digital Out	: PCM
Dynamic Compression	: On
PCM Down Sampling	: On
Speaker Setup

Original

Others

Subtitle

Others

	6. Press the ENTER button.	6. Press the ENTER button.

		- The language is selected and the screen returns to
	- The language is selected and the screen returns to
		Language Setup menu.
	Language Setup menu.
		6. Press the ENTER button.
		- The language is selected and the screen returns to
		Language Setup menu.
		Note

Dolby/DTS Digital Out

1.PCM : Converts to PCM(2CH) audio.

2.Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output. Select Bitstream when connecting to a Dolby digital and DTS Decoder.

Note There is no analog audio output when you play DTS sound disc.

MPEG-2 Digital Out

•If the selected language is not recorded on the disc, the original pre-recorded language is selected.

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

1.PCM : Converts to PCM(2CH) audio.

2.Bitstream : Outputs MPEG-2 Bitstream via digital output. Select Bitstream when connecting to an MPEG-2 Decoder.

Dynamic Compression

1.On : To select dynamic compression.

2.Off : To select the standard range.

ENG-32		ENG-33