MTX Audio MP41B, MP41W owner manual Wiring, Bookshelf, Connecting the Speakers to Your System

Page 6

MP41 CONFIGURATION GUIDE

BOOKSHELF

Remove the B-Style end caps, brass thumb screws, and aluminum mounting bracket. Replace the brass thumb screws in each end of the cabinet and snap A-Type end caps into place. Then simply place the self adhesive cabinet feet in the appropriate locations to protect the MP41 cabinet and whatever surface that it will sit on.

A-TYPE

CAP

A-TYPE

CAP

WIRING

Connecting the Speakers to Your System

Though there are many sizes of speaker wire available. MTX recommends using 18 gauge or heavier wire to connect your loudspeakers to your amplifier or receiver. Before cutting the speaker wire to the proper lengths, be sure to leave an extra two or three feet of surplus wire, just in case you have to move the components around. Using a wire cutter or sharp knife, strip off about half an inch of insulation from both ends. Twist the exposed wires to make them easier to insert in the speaker terminals. Make sure that you unplug your amplifier or receiver before proceeding any further.

When using the MP41 as a center channel or surround speaker follow the hook-up directions included with your surround processor.

It is essential that you connect your two speakers “in phase”. To do so, first take note of the code used on the speaker wire to differentiate between the two wires that run through it.

To wire your speakers in phase, make sure the positive (+) terminals on the back of your receiver are connected with the red terminals on the back of your loudspeakers, and the negative (-) terminals on the receiver are connected with the black terminals on the speakers (see diagram). Note that negative (-) terminals on the receiver may also be marked “common” or “ground” (GND).

Be certain that no stray strands of wire cross from one terminal to another on either speaker or receiver. This could result in a damaging short.

 

SELF ADHESIVE

 

5

CABINET FEET

10

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model MP41B/MODEL MP41W Baseline Rd Phoenix AZ Phone FaxTable of Contents Warranty StatementCongratulations Specifications IntroductionHome Theater MP41 SET UP GuideMP41 Parts Guide Left/Center/Right Front Speaker HeightMP41 Configuration Guide Typical Loudspeaker PlacementCenter Channel Wiring Connecting the Speakers to Your SystemBookshelf Grill Assembly PaintingFloor Stand Bracket Mounting Style CAP Brass Thumb Screw Aluminum Bracket

MP41W, MP41B specifications

MTX Audio is renowned for producing high-quality audio equipment, and their MP41W and MP41B speakers exemplify this commitment to excellence. Designed specifically for marine use, both models offer robust sound performance while being built to withstand the rigors of water environments.

The MTX Audio MP41W is the white variant, while the MP41B comes in a sleek black finish. Both models feature a 4-inch full-range speaker that delivers impressive sound clarity and volume, making them ideal for outdoor adventures on boats, jet skis, or even ATV riding. The speakers boast a peak power handling of up to 150 watts, providing enough strength to fill open spaces with rich audio.

One of the standout characteristics of the MP41W and MP41B is their weather-resistant design. They are constructed with a durable polypropylene cone that is not only lightweight but also provides excellent sound without the risk of damage from moisture. Additionally, the speakers are equipped with a UV-resistant coating that safeguards them against sun damage, ensuring long-lasting durability even in harsh marine environments.

In terms of technology, these speakers incorporate a powerful neodymium magnet system, which enhances the overall performance by improving efficiency and sound output. This means that, even at higher volumes, audio distortion is minimized, resulting in clear and engaging sound quality. The speakers are also equipped with a 20mm tweeter that contributes to a full-range sound, providing both depth and clarity across various music genres.

Installation is another critical aspect where the MP41W and MP41B stand out. They come with a simple mounting system that allows for easy integration into various aquatic settings, whether it be on a boat or sports vehicle. The speakers are compatible with most marine audio systems, adding versatility for users looking to upgrade their sound experience.

Additionally, these models feature a 4-ohm impedance, which is compatible with a wide range of amplifiers, further enhancing their usability. The sleek design of both the MP41W and MP41B allows them to blend seamlessly into any aesthetic, making them not just functional but also stylish additions to any marine setup.

In conclusion, the MTX Audio MP41W and MP41B speakers are excellent choices for anyone looking to elevate their audio experience in marine environments. Their blend of weather resistance, powerful sound capabilities, and user-friendly installation makes them stand out in the competitive speaker market. Whether you're throwing a party on your boat or just enjoying some music while fishing, these speakers are sure to deliver impressive performance.
Top Page Image Contents