Samsung HW-J560/XE, HW-J561/XE Connections, Installing the Wall Mount, Installation Precautions

Page 11

CONNECTIONS

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall.

▶▶Installation Precautions

●●Install on a vertical wall only.

●●For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set.

CONNECTIONS

2 inches(5 cm) or more

ENG

●●Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.

●●

Purchase and use the fixing screws or anchors appropriate for the

 

kind of wall you have (plaster board, iron board, wood, etc.). If

 

possible, screw the support screws into wall studs.

●●

Purchase wall mounting screws according to the type and thickness

 

of the wall you will mount the Soundbar on.

 

--Diameter : M5

 

--Length: 1 3/8 in (35 mm) or longer recommended.

●●

Connect cables from the unit to external devices before you install it

 

on the wall.

●●Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.

To install the Soundbar on a wall, follow these steps:

1. Place the installation guide against the wall surface.

●●The installation guide must be level.

●●If the TV is mounted on the wall, install the Soundbar at least 2

inches (5 cm) below the TV.

2.

Mark the location where the screws will go through on the wall, and

 

 

then remove the installation guide. Next, drill holes for the screws

 

 

using an appropriately sized drill bit.

 

3.

Fasten the wall mounts and screws to the marked locations.

Wall Mounting the Soundbar

 

●● The left and right mounts are different shapes. Make sure to position them correctly.

4.Secure the two holder screws to the screw holes on the back of the Soundbar's main body, one on the left and one on the right.

5.Insert the USB cable into the back of the Soundbar before installing it on the wall.

6.Set the holder screws on the back of the Soundbar into the grooves of the wall mounts.

For safe installation, make sure to push the holder screws all the way to the bottom of the grooves.

11

Image 11
Contents Wireless Audio Soundbar Licenses FeaturesSafety Warnings Safety InformationPrecautions Contents WHAT’S Included Getting StartedBefore Reading the USER’S Manual Selects the D.IN, AUX, HDMI, BT, TV, USB input Turns the power on and offDescriptions TOP/FRONT PanelHdmi Rear PanelPress to select a source connected to the Soundbar Remote ControlRemote Control Buttons and Functions Align the marks side by side as Installing the Battery in the Remote ControlInsert a 3V lithium battery. Keep Use a suitable coin to Turns the Soundbar on and offConnections Installing the Wall MountInstallation Precautions Insert screws through the remaining holes, and then tighten Detaching the Wall MountConnecting the Wireless Subwoofer Connections Hdmi Cable not supplied Connecting AN External Device Using AN Hdmi CableHdmi Cable not supplied Digital Devices To use, change the function to D.IN Audio CableARC Hdmi OUT Input ModeInput mode Display FunctionsOnly one Bluetooth device can be paired at a time BluetoothTo connect the Soundbar to a Bluetooth device Bluetooth deviceMore About Bluetooth Bluetooth Power on Bluetooth PowerTo disconnect the Bluetooth device from the Soundbar To disconnect the Soundbar from the Bluetooth deviceStarting the Samsung Audio Remote App Using the Samsung Audio Remote APPInstalling the Samsung Audio Remote App TV Soundconnect Connecting a TV to the SoundbarUsing the Bluetooth Power On function Before you connect a USB device USBSoftware Update Troubleshooting Model name HW-J560/HW-J561 SpecificationsWeight Main Unit 7Kg Subwoofer AppendixAustria
Related manuals
Manual 26 pages 33.79 Kb Manual 26 pages 1.29 Kb Manual 26 pages 35.39 Kb Manual 26 pages 51.25 Kb Manual 1 pages 7.21 Kb