Installation Instructions | FHP |
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions.
•WARNING:Improper installation can result in serious personal injury! Make sure that the structural members can support a redundant weight factor five times the total weight of the equipment: if not, reinforce the struc- ture before installing the FHP.
•WARNING:Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•WARNING:The installer is responsible for verifying that the ceiling to which the FHP is anchored will safely support the combined load of all attached components or other equipment.
•WARNING:The weight of the display placed on the FHP must not exceed 40 lbs. (18.1 kg), the maximum load capacity of the FHP.
•WARNING:Watch for pinch points. Do not put your fingers between movable parts.
•WARNING:Make sure the mount and brackets are correctly oriented.
•CAUTION: Check the unit for shipping damage before you begin the installation.
TOOLS REQUIRED FOR INSTALLATION
• Saw (to cut plastic) |
| |
• Electric drill and bit set |
| |
• | Phillips Screwdriver |
|
• | Level |
|
NOTE: Other tools may be required depending on the |
| |
| mounting surface and method of installation. |
|
CONTENTS |
| |
DRAWINGS | 2 | |
INSPECT THE UNIT BEFORE INSTALLING | 3 | |
FHP INSTALLATION | 3 | |
DISPLAY INSTALLATION | 4 | |
CABLE MANAGEMENT | 5 | |
ADJUSTMENTS | 5 | |
2