TROUBLESHOOTING (continued)
PROBLEM – The ”UNSWITCHED ON“ LED is off.
Possible Cause
The PowerCenter is not plugged into a properly grounded AC outlet.
Possible Solution
• Plug the PowerCenter into a properly grounded 120V outlet.
PROBLEM – The ”SWITCHED ON“ LED is off.
Possible Cause #1
You are using the Remote AC Control feature (see page 9) and haven’t plugged the Remote AC Control Cable into either the PowerCenter’s corresponding outlet or the component you wish to activate the Remote AC Control feature.
Possible Solution
•Plug one end of the Remote AC Control Cable into the PowerCenter’s corresponding outlet and the other end into the component you wish to activate the Remote AC Control feature. Once you turn on the component, the “SWITCHED ON” LED should light up.
27