Samsung HW-J6511R/XE manual Method 3. Connecting to a Wireless Network, Start screen, Complete

Method 3. Connecting to a Wireless Network

Installing the Samsung Multiroom App and Connecting Wirelessly

To install Samsung Multiroom app for the first time, follow the steps shown below.

1.Press and hold the SPK ADD button on the rear of the Soundbar for more than 1 second.

•There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main unit. Afterwards, the message “WIFI READY” appears when standby-for-connection mode activates.

2.Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Wi-Fi SETUP SPK ADD

ADD SPK SETUP Fi-Wi

Rear of Soundbar

Internet Wireless Router Smart Device

3.Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).

4.Launch the Samsung Multiroom app.

AndroidiOS

Samsung Multiroom app

5.Complete the initial settings by following the instructions on the app screen.

Complete the settings by following the instructions on the Samsung Multiroom app screen.

Start screen	Entering the password	Speaker connection
	for the wireless router	complete

cYou must enter the password of your wireless router to connect your Soundbar to your wireless network through Samsung Multiroom app.

cIf your wireless router has no designated password, the app completes the initial settings without asking you to enter a password.

·8 · English