INTRODUCTION
Congratulations on your purchase of MTX Loudspeakers. Your new speakers represent the latest technologies in loudspeaker design and manufacturing. They will provide outstanding performance and years of listening enjoyment. Please take time to read through this manual thoroughly to insure you get maximum performance out of your new loudspeakers.
SATELLITE/CENTER CHANNEL FEATURES
•Video shielding for placement near a TV or monitor
•1/2" Balanced dome tweeter
•Video sheilded
•Spring loaded push terminals
•Injection molded plastic cabinets
SUBWOOFER FEATURES
•High efficiency amplifier
•Bass reflex enclosure with low noise vent
•Adjustable
•Adjustable gain control
SPEAKER PLACEMENT
HTB1 SET UP GUIDE
Typical Loudspeaker Placement
Figure 1 illustrates the most generally accepted speaker locations for a home the- ater system. Although there are an infinite number of set up options using Figure 1 as a template will certainly provide a great starting point. Experimentation with slightly different speaker locations may provide improved performance in your specific listening environment.
The front left and right speakers should form a 45 degree triangle using the center seating position as the apex.
The surround speakers should be placed beside the listening area, and pointed towards each other. It is also recommended that the speakers be 2-3 feet above the listeners head.
Left/Center/Right Front Speaker Height
One of the most important parameters for the left/center/right front speakers in a home theater system is height. Figure 2 shows the ideal arrangement of the speakers in relation to the viewing screen: all three speakers are aligned on the same horizontal plane. This establishes a firm image height when special audio effects are panned from one side to the other, such as a speeding car moving across the screen. When a large discontinuity occurs between the heights of the center front channel and the left/right front speakers, as depicted in Figure 3, the image of the moving object becomes confused and somewhat unnatural due to shifts in image height.
CARE AND MAINTENANCE
Your speakers are designed to work with a wide range of electronic components. As little as 20 watts per channel can provide enough power for most applications. If you have a large room or prefer louder listening levels, more power may be required.
Caution: When choosing an amplifier, do not exceed the power rating of the speaker. If you hear very high levels of audible dis- tortion you are exceeding the capabilities of the system. Damage can occur from this distortion, turn the volume back down until the distortion disappears.
Use the following guidelines to maintain the appearance of your speakers. Use a soft, damp cloth to clean the speaker cabinet. Avoid using harsh detergents or cleaning fluids. Remove the grills to vacuum and remove dust. Do not vacuum any of the speaker components, permanent damage could occur.
TECHNICAL ASSISTANCE
For additional technical assistance you can visit our website at www.mtx.com. Otherwise, our technical service representatives can be reached by phone:
MTX WARRANTY INFORMATION
All HTB1 speaker systems purchased in the United States from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of one year from the date purchased by the end user, and limited to the original retail purchaser of the product.
MTX disclaims any liability for other incurred damages resulting from product defects. Any expenses incurred in the removal and reinstallation of product is not covered by this warranty. MTX's total liability will not exceed the purchase price of the product. This warranty is valid in the United States only.
Proof of purchase is required when requesting service, so please retain your sales receipt and take a moment to register your warranty on line @www.mtx.com.