MTX Audio manual Specifications, HTB1 Satellite/Center Channel

Page 3

SPECIFICATIONS

HTB1 Satellite/Center Channel

Driver Compliment

Midrange- 3” shielded with paper cone, rubber surround

Tweeter- 1/2" Balanced dome tweeter

Frequency Response: 150Hz - 20kHz

Impedance: 8 ohms nominal

Power Handling: 75 watts RMS / 150 watts peak music

Recommended Amplifier Power: 20-75 watts RMS

Sensitivity: 85dB@2.83V/1M

Weight:

Satellite- 1.8 lbs.

Center Channel- 3.0 lbs

Dimensions:

Satellite- 5 7/8"H X 4"W X 4"D

Center Channel- 4 1/8"H X 9 5/8"W X 3 3/4"D

HTB1 Subwoofer

Driver Compliment

Woofer- 8" high excursion woofer

Amplifier- 60 watts output

Crossover Frequency: continuously variable 50Hz-150Hz

Frequency Response: 50Hz - 150Hz

Enclosure: tuned port design

Weight: 17 lbs.

Dimensions: 12 3/4” H X 10 1/4” W X 13” D

Optional Installation Accessories

A. Feet for Satellites

Included in the system are rubber feet that allow you to raise the Satellite Speakers up off of a level surface. Simply peel each of the four feet off the sheet and press on to the bottom of the Satellite Speaker. Repeat steps for the remaining Satellite Speakers.

B. Feet for Center Channel

Included in the system are plastic feet that allow the Center Channel to be angled more horizontally on top of your television monitor. If you wish to use the feet, simply insert the knurled end of the feet into the two holes in the lower rear of the Center Channel.

 

CENTER

 

LEFT

FRONT

RIGHT

 

FRONT

 

FRONT

HTB1

45SUBWOOFER

LEFT

RIGHT

REAR

REAR

LISTENING AREA

Figure 1- Typical loudspeaker placement in a home theater system.

Figure 2- Proper placement of left/center/right front speakers.

Figure 3- Improper placement of left/center/right front speakers

Image 3
Contents HTB1 Care and Maintenance SATELLITE/CENTER Channel FeaturesSubwoofer Features Speaker PlacementHTB1 Satellite/Center Channel SpecificationsRefer to Figure a Explanation of Features and ControlsWiring and Connections Speakers. Recommended setting 120Hz-150Hz