Chief Manufacturing TPP instruction manual 3/8-16Nylock Nuts and Washers

Instruction Manual TPP

6.Install the face plate in the desired position (see Figure 4, Fig- ure 5, Figure 6 and Figure 7) on the pitch-adjustable plate and secure using two 3/8-16 Nylock nuts and washers in any matching set of radial holes slotted to allow slight roll adjust- ment.

Figure 4. Vertical Tilt Shown without Back Plate for Clarity

Figure 5. Horizontal Tilt Shown without Back Plate for Clarity

3/8-16 Nylock Nuts and Washers

Figure 6. Vertical Truss Shown with Back Plate Figure 7. Horizontal Truss Shown with Back Plate

4