Chief Manufacturing TPP instruction manual Remove the Display

Page 7

Instruction Manual

TPP

Remove the Display

WARNING: Make sure the flag securing the display is com- pletely raised at all times except when removing or installing the display. The flag must be all the way up when installing/removing cables.

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

1.Unlock the display from the TPP by lowering the flag all the way down to the unlocked position.

4.Using two people, slide the display up and out of the TPP.

6

Image 7
Contents I N S T R U C T I O N M A N U A L BEFORE YOU BEGINCHIEF MANUFACTURING INC Truss Pitch-AdjustableTPP MountCONTENTS TOOLS REQUIRED FOR INSTALLATIONIMPORTANT WARNINGS AND CAUTIONS PARTS Figure 3. Pitch-AdjustablePlate to Back Plate INSPECT THE MOUNT BEFORE INSTALLINGTPP INSTALLATION 10-24Nut Nylon Spacer Figure 1. Install Flag3/8-16Nylock Nuts and Washers 0 Degree Remove the Display