The following procedure shows the basic steps to navigate the network and USB menus. See pages 68 to 70 for details about each sub input source.
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE.
1Press 3NET/USB on the remote control to select “NET/USB” as the input source.
The cursor on the left of the NET/USB indicator lights up in the front panel display, and the contents previously played for the corresponding sub input source of NET/USB is automatically played.
Lights up
NET | VCR | DVR | CBL | DTV DVD | BD | MD | ||
USB | DOCK | SAT | HD DVD | TAPE |
2Press KDISPLAY to display the top NET/USB menu.
The following display appears in the video monitor. If any other screen appears in the video monitor, press
IMENU on the remote control repeatedly until the top NET/ USB menu appears.
Top
PC/MusicCAST
Internet Radio
USB
3Press 9k / n to select the desired sub input source and then press 9h or 9ENTER.
y
You can also select the desired sub input source by pressing APC/ MCX, ANET RADIO, or AUSB when “NET/USB” is selected as the input source. This unit automatically starts playback of the last selected music file, Internet Radio station, or Podcast when you press
APC/MCX, ANET RADIO, or AUSB.
4Press 9k / n / l / h to select the desired song or
Internet Radio station.
•Press 9k / n to select the desired menu.
•Press 9h to enter the selected menu.
•Press 9l to return to the previous menu level.
y
•“>” in the right corner of each menu line indicates that there is a submenu available in the next menu level.
•You can also press 9ENTER or IMENU to enter the selected menu or to return to the previous menu level.
Using Network/USB features
5Press 9ENTER to play the selected song or to listen to the selected station.
y
•See page 65 for details about the functions of the play information display.
•Some items do not appear in the play information display depending on the selected sub input source.
•You can set the time for which the GUI screen of the network/USB is displayed in the video monitor by using “On Screen” in “Manual Setup” (see page 90).
•Press KDISPLAY again to turn off the Network/USB menu.
■Remote control operation
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 3NET/
USB.
| Button | Function |
8 | TITLE | Bookmark *1 |
9 | k | Up |
|
|
|
| n | Down |
|
|
|
| l | Previous menu |
|
|
|
| h | Subsequent menu |
|
|
|
| ENTER | Subsequent menu |
|
|
|
0 | MEMORY | Memory |
ANET RADIO Select “NET RADIO”
USB | Select “USB” |
b | Skip backward (“PC/MCX” and “USB” only) |
|
|
a | Skip forward (“PC/MCX” and “USB” only) |
|
|
PC/MCX | Select “PC/MCX” |
|
|
s | Stop |
pPlay
B 1 – 8 | Numeric buttons | |
I | MENU | Previous menu |
|
|
|
K | DISPLAY | Display |
|
|
|
*1 Press and hold to store your favorite Internet Radio stations with bookmarks (see page 69).
*2 Press to assign or recall the preset items (see page 70).
Network/USB menu in the Zone OSD
You can use the network/USB feature with the Zone OSD. The design and functions may be different from the network/USB menu displayed in the video monitor in the main zone.
Operation | Internal Source |
|
|
