Remote Control, Miscellaneous Correction, N e r

Before Requesting Service (continued)	●

Remote Control

The remote control cannot work.

•Aim the remote control directly at the remote sensor on the VCR.

•Avoid all obstacles which may interfere with the signal path.

•Inspect or replace the batteries.

•Make sure batteries are inserted correctly.

A cassette cannot be inserted.

The cassette does not eject.

The cassette ejects when you press REC/OTR ●.

•Insert the cassette with the window side up and the record tab facing you.

•Check that a cassette tape is not already inserted. Press

•Check that the AC power cord is correctly connected to an AC outlet.

•Check that the record tab on the back of the cassette is not removed.

	Specifications	●
	G e n e r a l	●
	G e n e r a l
	Mains voltage	AC 110 V – 240 V
	Mains frequency	50 Hz/60 Hz
	Power consumption	Approx. 14W
	Ambient temperature	+5 °C to +40 °C
	Relative humidity	10 % to 80 %
	Dimensions (WxHxD)	Approx. 360 mm x 94 mm x 249 mm
	Mass	Approx. 3.0 kg
	Position for use	Horizontal
	Video output channel	UHF E36 (adjustable betweeen E28 — E60)
	Possible number of TV channel	99
	Number of pre-programmable memory blocks	8
	Number of days in advance	365 or every day, or every week
	T u n e r
	Video signal	B/G, D/K, I, SECAM K1
	VHF	42 MHz — 175 MHz
	VHF H	175 MHz — 470 MHz
	UHF	470 MHz — 870 MHz
		CATV
	V i d e o
	Input (VIDEO IN)	0.5 V(p-p) to 2.0 V(p-p), 75 ohms
	Output (VIDEO OUT)	1.0 V(p-p) ±0.2 V(p-p), 75 ohms
	Resolution	Better than 240 lines
	Signal/noise ratio	Better than 43 dB
	A u d i o
	Input (AUDIO IN)	–8 dBs, 50 k ohms (0 dBs=0.775 Vrms)
	Output (AUDIO OUT)	–8 dBs, 1 k ohms (0 dBs=0.775 Vrms)
	A c c e s s o r i e s s u p p l i e d	Remote control unit
		RF coaxial cable
		Batteries – R6(SUM-3)/AA

(only for checking operations)