34 EN

Speakers

Center speaker:
• Speaker impedance: 4 ohm
• Speaker drivers:
• HTS55x3: 1 x 76.2 mm (3") woofer
• HTS65x3: 2 x 76.2 mm (3") woofer
• Dimensions (WxHxD):
• HTS55x3: 223 x 101.5 x 93.5 mm
• HTS65x3: 280 x 95 x 92 mm
• Weight:
• HTS55x3: 0.61 kg
• HTS65x3: 0.97 kg
Front / rear speakers:
• Speaker impedance: 4 ohm
• Speaker drivers:
• HTS55x3: 1 x 76.2 mm (3") woofer
• HTS65x3: 2 x 76.2 mm (3") woofer
• Dimensions HTS55x3 (WxHxD):
• Satellite (small) speakers: 90 x 185 x
105.5 mm
• Tallboy (tall) speakers: 247 x 1091 x 242
mm
• Dimensions HTS65x3 (WxHxD):
• Satellite (small) speakers: 101 x 280 x
104 mm
• Tallboy (tall) speakers: 260 x 1101 x 260
mm
• Weight HTS55x3:
• Satellite (small) speakers: 0.54 kg each
• Tallboy (tall) speakers: 2.19 kg each
• Weight HTS65x3:
• Satellite (small) speakers: 0.87 kg each
• Tallboy (tall) speakers: 3.83 kg each

Remote control batteries

• 2 x AAA-R03-1.5 V

Laser

• Laser Type (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
• Wave length: 405 +7 nm/-7 nm (BD), 655
+10 nm/-10 nm (DVD), 790 +10 nm/-20 nm
(CD)
• Output power (Max. ratings): 20 mW (BD), 6
mW (DVD), 7 mW (CD)

9 Troubleshooting

Warning
•Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at www.philips.
com/support.

Main unit

The buttons on the home theater do not work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.

Picture

No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that you use a High Speed HDMI
cable to connect the home theater and TV.
Some Standard HDMI cables do not display
properly for some images, 3D video, or Deep
Color.
• Make sure that the HDMI cable is not faulty. If
it is faulty, replace it with a new cable.
• Press (Home) and then 731 on the
remote control to restore the default picture
resolution.
• Change the HDMI video setting, or wait for
10 seconds for auto recovery.
Discdoesnotplayhigh-denitionvideo.
• Make sure that the disc contains high-
denition video.
• Make sure that the TV supports high-
denition video.
• Use an HDMI cable to connect to the TV.