
Graphical user interface (GUI) menu
Example 2: Clearing a jack assignment.
1Select “Input Select” and then select the desired input source (“DVD”, etc.).
2Select “I/O Assignment” and then select the desired jack assignment (“Coaxial Input”, “Optical Input”, “Optical Output”, “Analog I/O”, “Component Video”, or “HDMI”).
3Select “None” and then press 9ENTER to clear the assignment.
Notes
•“None” appears in the GUI when any input source is not assigned to the input/output jack.
•You cannot select a specific item more than once for the same type of jack.
•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to signals input at the COAXIAL jack.
■Audio Select (Audio input jack select)
Use this feature to select the type of the input jack you want to use.
Choice |
| Functions |
Auto | Automatically selects input signals in the following | |
| order: | |
| (1) HDMI | |
| (2) | Digital signals |
| (3) | Analog signals |
|
| |
HDMI | Selects only HDMI signals. When HDMI signals are not | |
| input, no sound is output. | |
|
| |
Coax/Opt | Automatically selects input signals in the following | |
| order: | |
| (1) | Digital signals input at the COAXIAL jack. |
| (2) | Digital signals input at the OPTICAL jack. |
| When no signals are input, no sound is output. | |
|
| |
Analog | Selects only analog signals. If no analog signals are | |
| input, no sound is output. | |
|
|
|
y
•You can also select the audio input jack by pressing FAUDIO SELECT (or OAUDIO SEL). See page 52 for details.
•You can set the default audio input jack select of this unit by using “Audio Select” in “Option” (see page 93).
Note
This feature is not available when no digital input jack (OPTICAL, COAXIAL and HDMI) are assigned. In addition, “HDMI” is not available as an Audio input jack select setting when the HDMI input jacks are not used. Use “I/O Assignment” in “Input Select” to reassign the respective input jack.
■Decoder Mode (Decoder mode)
Use this feature to switch the decoder mode. You can designate the reassigned digital input jacks (see page 81) for digital audio signals.
Choice | Functions |
Auto | Automatically detects digital audio signal input types and |
| selects the appropriate decoder. |
|
|
DTS | Activates the DTS decoder when digital audio signals are |
| input. |
|
|
■Volume Trim (Volume trimming)
Use this feature to adjust the level of the signal input at each input source. This feature is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.
Control range:
Initial setting: 0.0 dB
y
This parameter also affects the signals output at the ZONE OUT jacks.
Note
You can only adjust the volume for the current input source using this setting.
■Rename (Rename)
Use this feature to change the name of the inputs in the GUI menu or the front panel display menu. (“DVD” is used as the source component in the following example.)
1Press 9l / h to place the _ (underscore) under the space or character you want to edit.
|
|
| Decoder Mode |
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
| Volume Trim |
|
| CAPITAL |
| ||
|
|
|
| ||||||
|
|
|
| ||||||
|
|
| Rename | DVD |
| ||||
|
|
|
| ||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| OK |
|
| RESET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2Press 9ENTER repeatedly to select a character type
(CAPITAL/SMALL/LATIN CAPITAL/LATIN SMALL/ FIGURE/MARK).
3Press 9k / n to select the character you want to use and 9l / h to move to the next one.
•You can use up to 9 characters for each memory.
•Press 9n to change the character in the following order, or
press 9k to go in the reverse order:
CAPITAL | A to Z, space | |
SMALL | a to z, space | |
LATIN CAPITAL | Ä, Ö, Ü, etc., space | |
LATIN SMALL | ä, ö, ü, etc., space | |
FIGURE | 0 to 9, space | |
MARK | !, #, %, &, etc., space |
•Press 9ENTER to switch between character types.
•Press 9h repeatedly to select “RESET” to set the name of the input source to the initial name.
Notes
•The character types you can select differ depending on the setting in “Language” (see page 95).
•If you set “Language” to “ ”, you can also select Japanese characters.
4Press 9l / h repeatedly to select “OK” and press 9ENTER when complete.
y
•Repeat steps 1 to 4 to rename each input.
•You can also change the name of the input source that appears in the display window (4) on the remote control. Refer to “Changing source names in the display window (RNAME)” on page 106.
Note
You can only change the name of the current input source (except for multi channel input sources) using this setting.